Building a Steel Plate roller

pinballlooking · 04-26-21, 03:19 PM

I need a plate roller. Someone sells a set of plans for this one.
They also have a materials list what you need to buy to make it.

https://www.etsy.com/listing/8789266..._id=2403653662

I can cut it out with my CNC plasma table.
I am going to build a trenching bucket for subcompact tractor and it has a curved back. The back of the bucket is 10 gauge the sides and the rest are 3/8” steel.

I could make without a roller but this will make a nicer product and I can use it for other projects. Like fire rings who know what else.

This is a picture of one someone else made from the plans.

pinballlooking · 05-07-21, 12:40 PM

I should be able to finish up my plate roller this weekend.

Daox · 05-07-21, 12:53 PM

Very cool. How thick can you roll?

pinballlooking · 05-07-21, 01:18 PM

It will roll 9 inches of 1/4 inch and wider for thinner material up to 36".

Later I can make fire pits with it.

pinballlooking · 05-07-21, 10:08 PM

I finished my plate roller. I will get to test it tomorrow.
It is very heavy.

Daox · 05-08-21, 12:09 PM

How do you drive the rolls?

pinballlooking · 05-08-21, 03:09 PM

Here is a better picture. It is manual with a handle.

pinballlooking · 05-09-21, 11:34 AM

I rolled some 10 gauge this morning. It was simple and quick.
This will work great for my trenching bucket.

pinballlooking · 05-10-21, 12:58 AM

I made the roller for this job.
The bucket sides are 3/8” plate and the curved part is 10 gauge.

pinballlooking · 05-11-21, 05:07 PM

Here is what the finial product looks like. It will be sandblasted and powder coated black.
I sent a preview to a tractor dealer today and he ordered one.

04-26-21, 03:19 PM	#1
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Building a Steel Plate roller I need a plate roller. Someone sells a set of plans for this one. They also have a materials list what you need to buy to make it. https://www.etsy.com/listing/8789266..._id=2403653662 I can cut it out with my CNC plasma table. I am going to build a trenching bucket for subcompact tractor and it has a curved back. The back of the bucket is 10 gauge the sides and the rest are 3/8” steel. I could make without a roller but this will make a nicer product and I can use it for other projects. Like fire rings who know what else. This is a picture of one someone else made from the plans. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-07-21, 12:40 PM	#2
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I should be able to finish up my plate roller this weekend. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-07-21, 12:53 PM	#3
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Very cool. How thick can you roll? __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-07-21, 01:18 PM	#4
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	It will roll 9 inches of 1/4 inch and wider for thinner material up to 36". Later I can make fire pits with it. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 05-08-21 at 12:47 AM..

05-07-21, 10:08 PM	#5
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I finished my plate roller. I will get to test it tomorrow. It is very heavy. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-08-21, 12:09 PM	#6
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	How do you drive the rolls? __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-08-21, 03:09 PM	#7
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Here is a better picture. It is manual with a handle. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-09-21, 11:34 AM	#8
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I rolled some 10 gauge this morning. It was simple and quick. This will work great for my trenching bucket. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

05-10-21, 12:58 AM	#9
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I made the roller for this job. The bucket sides are 3/8” plate and the curved part is 10 gauge. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 05-10-21 at 08:25 AM..

05-11-21, 05:07 PM	#10
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Here is what the finial product looks like. It will be sandblasted and powder coated black. I sent a preview to a tractor dealer today and he ordered one. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.