01-08-13, 09:17 AM | #17 | |
Less usage=Cheaper bills
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
|
I have thinner copper pipe than what is coming out of the water heater as it makes its run to the bathrooms, not sure the size but I think it is half inch coming out of the water heater and I had bought four lengths of 3 foot(1 meter) pipe insulation and insulated three feet on the cold line going back towards the water softener which is warm pipe when the water is stagnant. I then insulated 9 feet or 3 meters from that point towards where the pipe joins the smaller runs to the kitchen and bathrooms. I have taken a one gallon juice jug and it takes 3/4 gallon to get hot water to the shower faucet which is also the farthest length away from the water heater.
Quote:
Regarding the pipe insulation, daox revealed that the output temperature at his far faucets was hotter and he was able to turn down his water heater thermostat after adding pipe insulation. If you have multiple people in your house and your showers aren't as short as mine, it might be a good idea to use it if it means you can drop your water heater temperature down a bit. I have my water heater set to 130 degrees to get a 15 minute shower at a temperature that is as hot as I want it with a 1.5gpm shower head that actually uses 1.8gpm. Oddly enough when my house is hot in the summer and the a/c is off I can have the temperature in the water heater MUCH colder than when I get home and turn the thermostat up and the house is still 50 and getting warmer when I take a shower. In my case I might insulate the accessible pipes and turn down the water heater. Also in the summer I went an entire two months(the hottest ones) taking daily showers with the water heater thermostat all the way down and was able to do it purely on the heat from the pilot light, believe it or not. 4 therms for multiple months, that's shared with using the stove so it might otherwise have been 3 therms. I pay 65 cents a therm. I can't do that in the winter though the tank cools off too fast, even with the house at 70 degrees but 80-90 degrees(30c) I can get away with it. I have a water heater insulating wrap that I got and will soon have on the heater and if I add insulation to the pipes, I think my usage will be lower. It will especially help as I have two more people moving into my house that will probably use plenty more water in the shower than I will. Pipe insulation is cheap. I think I paid $10(max, but I might have paid less) for 12 feet or 4 meters of pipe insulation when it was on sale. I want to find some thicker stuff though for the run to the shower this time around but I don't see it at the hardware store but I will probably check a few more places to see if I can get thicker stuff but in reality, I don't think it takes much to make a dramatic impact. |
|
|
|