EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Heating
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-15-20, 03:08 PM   #1
menaus2
Apprentice EcoRenovator
 
Join Date: Feb 2011
Location: Driftless Region, North America, Earth, Solar System, Orion Arm, Milky Way Galaxy,Virgo Supercluster
Posts: 116
Thanks: 13
Thanked 34 Times in 25 Posts
Default menaus2's 240sqft Hydronic Thermal collector

Hi All! It's been a while since I've documented a major project on the forum, so I'll be starting from the planning process going forward.

Last year I installed a 36sqft drainback collector with a 100gal. storage tank on our house. I havn't gotten around to posting the details yet, but hopefully they'll be forthcoming. Suffice to say it works great (roughly 5,000 btu/hr), except our hot water usage keeps it in the 60-90F range. So, it's time to expand big time!

I have a woodshed about 100' away from the house with roughly 720 sqft of wall available, my propane furnace also has a plenum water-air heat exchanger from the wood boiler we removed available as well. So I would like a system that can keep the solar tank above 120 often enough to kill bacteria problems and also use the furnace for space heating when there is excess heat being produced. The collector design should be freeze-proof and have the option to be expanded in the future in a modular way.

I was inspired by Scott Davis' 194sqft pex collector and will also use a gycol loop with copper coils in the tank. I am looking to improve upon the design by using a manifold in the collector with 3 pex-al-pex runs to get better flow, I also plan to use twinwall polycarbonate sheets to get higher collector temps for better heat exchange.

I still have a lot of details to work out that are beyond my experience: relays & pumps and integrating that with the furnace. As well as sizing the collector copper coil heat exchangers in the tank.

I've attached a mock-up of the collector and a possible expansion of it in the future. Also a materials list and cost estimation.






Attached Thumbnails
Click image for larger version

Name:	solar_schematic.jpg
Views:	1350
Size:	20.1 KB
ID:	8839   Click image for larger version

Name:	solar1.jpg
Views:	1212
Size:	20.0 KB
ID:	8840   Click image for larger version

Name:	solar2.jpg
Views:	1184
Size:	20.4 KB
ID:	8841  
Attached Files
File Type: pdf Solar Build.pdf (38.4 KB, 1740 views)

Last edited by Daox; 03-11-20 at 12:39 PM..
menaus2 is offline   Reply With Quote
The Following 3 Users Say Thank You to menaus2 For This Useful Post:
Daox (03-11-20), Lawrence (02-07-22), skyking (03-14-20)
 


Tags
heating, pex, solar, thermal, water

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design