7210A-MPPT charge controller / step up only

ecomodded · 01-04-18, 01:29 AM

When the apparent mppt charger gets here I will also Time the sunlight to cloud transition glitch it has , it might cause a substantial energy loss or maybe not.

The Plot thickens

The panels will be carried set in a Vee in this single wheel trailer and towed behind the ebike. Any charge along the way is a bonus plan is to stop between 11 and 3 to recharge on the road . I will be able to charge once I reach my destination for camping or gold prospecting. Something i do now.

That arrangement is the best way i can carry them if i was to carry them stacked and flat they stick over the side rails 2 inches on either side and risk getting damaged.

They are propped up while I design a light angled aluminum frame. Planning to use 1 x 1" x 1/8th inch 6061 angle . It weighs in at 2.16 lbs per 8 ft length and should be strong enough for the job. Home hardware sells it for $22 per 8 ft.

01-04-18, 01:29 AM	#11
ecomodded Supreme EcoRenovator Join Date: Sep 2012 Location: Vancouver Island,Canada. Posts: 1,037 Thanks: 116 Thanked 100 Times in 87 Posts	When the apparent mppt charger gets here I will also Time the sunlight to cloud transition glitch it has , it might cause a substantial energy loss or maybe not. The Plot thickens The panels will be carried set in a Vee in this single wheel trailer and towed behind the ebike. Any charge along the way is a bonus plan is to stop between 11 and 3 to recharge on the road . I will be able to charge once I reach my destination for camping or gold prospecting. Something i do now. That arrangement is the best way i can carry them if i was to carry them stacked and flat they stick over the side rails 2 inches on either side and risk getting damaged. They are propped up while I design a light angled aluminum frame. Planning to use 1 x 1" x 1/8th inch 6061 angle . It weighs in at 2.16 lbs per 8 ft length and should be strong enough for the job. Home hardware sells it for $22 per 8 ft. __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.