EcoRenovator 2011 Fall Giveaway Donators – LUX

ER Blogger · 09-29-11, 07:16 AM

LUX is a maker of a few different products. They make mechanical, digital and programmable thermostats. They also have a line of timers, grab bars for showers, and range (cook top) parts. It may seem like an odd assortment of products, but they are probably most widely known for their line of [...]Post from: EcoRenovator.org

EcoRenovator 2011 Fall Giveaway Donators – LUX

More...

Daox · 09-29-11, 09:27 AM

While writing this article I found out about the 'swing' setting on the LUX thermostats. I happen to have an older LUX thermostat in my house and found that I have the same swing setting. Its not an obvious command and you have to look it up in the manual on how to do it, but I think I should see some savings from increasing my swing setting. It was at 1 degree F (which means +/- 1F) and now its set to 1.5F. This translates to longer furnace on times, and reduced cycling which used to be an issue for me before I did a few other things. It'll be interesting to see if increasing the swing will help even more.

09-29-11, 07:16 AM	#1
ER Blogger Helper EcoRenovator Join Date: Nov 2010 Location: Internet Posts: 60 Thanks: 0 Thanked 2 Times in 2 Posts	EcoRenovator 2011 Fall Giveaway Donators – LUX LUX is a maker of a few different products. They make mechanical, digital and programmable thermostats. They also have a line of timers, grab bars for showers, and range (cook top) parts. It may seem like an odd assortment of products, but they are probably most widely known for their line of [...]Post from: EcoRenovator.org EcoRenovator 2011 Fall Giveaway Donators – LUX More...

09-29-11, 09:27 AM	#2
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	While writing this article I found out about the 'swing' setting on the LUX thermostats. I happen to have an older LUX thermostat in my house and found that I have the same swing setting. Its not an obvious command and you have to look it up in the manual on how to do it, but I think I should see some savings from increasing my swing setting. It was at 1 degree F (which means +/- 1F) and now its set to 1.5F. This translates to longer furnace on times, and reduced cycling which used to be an issue for me before I did a few other things. It'll be interesting to see if increasing the swing will help even more. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.