07-06-20, 08:54 AM | #11 | |
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Quote:
4kWh of batteries would be overkill unless it's also being used for traction power. Could probably go that route fairly easily by replacing the alternator with a BLDC motor/generator.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
|
07-06-20, 09:28 PM | #12 | ||
Helper EcoRenovator
Join Date: Apr 2015
Location: US
Posts: 42
Thanks: 5
Thanked 1 Time in 1 Post
|
Quote:
Where would you suggest one mount this thermal storage tank in a Van or Jeep? It is not even remotely practical, and moving all that mass just uses more energy. Quote:
I am planning on putting a 4KWH battery under the back seat, for numerous reasons portable power is extremely convenient. The OP says he has a 24.8 KWH battery. That can run a LOT of air conditioning, or other useful things like power inverters, lights, heating, cooking, fans, etc. With only 4KWH I can run a ton of A/C for 4 hours...or smaller A/C for even longer. The lithium battery will also be used to run the block heater in the winter without an extension cord, and removing the lead starting battery gives me more room under the hood. I'm not trying to be rude but I honestly can't understand why your posts have anything to do with the topic. I don't think you understand the question. Onboard battery power is wonderful to have in any vehicle for numerous reasons. Thermal storage to any useful degree simply isn't an option on wheels. Thermal storage is a wonderful thing in stationary applications, but it is always very large and very heavy. |
||
07-06-20, 10:17 PM | #13 | ||
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Quote:
Quote:
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
||
07-07-20, 02:22 AM | #14 |
Supreme EcoRenovator
|
Sounds like you are on the right track already. A ton of a/c is literally enough for a Winnebago. In a Jeep, I'd probably go with half a ton of capacity, and get something energy star. They run part time pretty well and shut down the compressor before the fan to get the cool air out while the system bleeds down.
If you are running a bang bang unit (non vrf), make sure the power inverter has enough balls to start the compressor. It draws locked rotor amps for a few line cycles every startup. As close to pure sine wave as you care to spend will pay back in efficiency, extending the run time. At that capacity, I don't know if the price difference would justify a vrf unit. Sure, you'd save money for a smaller power inverter, but the half ton window shakers are selling for around 75 bucks used here. Maybe 150 or so brand new from the usual box stores. Last edited by jeff5may; 07-07-20 at 02:30 AM.. Reason: Information |
07-14-20, 05:25 PM | #15 | ||
Helper EcoRenovator
Join Date: Apr 2015
Location: US
Posts: 42
Thanks: 5
Thanked 1 Time in 1 Post
|
Quote:
Quote:
I have heard people claim that when using compressors that were not designed to be mounted on vehicles they die early because they can't handle the vibrations as well. I've seen this as a complaint on RV forums with mini splits. With that said I have no idea what would make an "RV" compressor different, but I know they cost a lot more. I really like the new DC powered compressors I've seen from China...but, they still seem to cost $500 or more for very very small, incomplete system. Also if someone is doing something like a van, they're making pure DC mini splits now for direct solar applications in pretty small sizes. Gotta pay to play though. |
||
07-14-20, 11:50 PM | #16 | ||
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Quote:
It's hard to beat the energy per weight of running a generator, but there are a number of obvious disadvantages to that which relegate it to more of a backup application. The real game changer would be fuel cells - quiet and efficient, just needs the cost to come way down. Quote:
https://openinverter.org/forum/viewtopic.php?f=14&t=258 There is a disadvantage in that they need about 200V to work, you can either build the battery to run in that voltage range (good idea if you want to be able to regen at high rates without dealing with really high currents) or use a DC/DC converter to get that voltage. It helps that the DC bus in a 120V inverter will be about 180V which probably will work.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
||
07-20-20, 08:26 PM | #17 |
Apprentice EcoRenovator
Join Date: Jun 2013
Location: TX
Posts: 275
Thanks: 2
Thanked 31 Times in 24 Posts
|
FYI the AC system in the average car is around 3 tons. Some smaller some larger. For a van you will be on the larger end. So you would need 3+ tons of ice per hour to cool it...
So to keep the van cool for say 8 hours you would need 24 tons of ice to do it. Actually more since some of that ice will have melted before you got to use it. So if it's a bigger van you could end up needing say 30 tons of ice. It would be more efficient to go back to hauling ice from frozen rivers up north on ships and using it to cool than it would to produce the ice and then haul it in a trailer behind the van. If you want to cool it and your power source is electricity the solution is simple. Order a Sanden electric compressor. Sanden is the top brand of automotive AC compressors on the market. Used in everything from production vehicles to big dozers and other heavy equipment. |
The Following User Says Thank You to Elcam84 For This Useful Post: | jeff5may (07-30-20) |
07-20-20, 09:16 PM | #18 |
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Tons per 24 hours, and only for the short time it takes to cool down. As mentioned, 1 ton is plenty for a fairly large RV.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
07-20-20, 11:41 PM | #19 |
Apprentice EcoRenovator
Join Date: Jun 2013
Location: TX
Posts: 275
Thanks: 2
Thanked 31 Times in 24 Posts
|
My goof and typed that wrong.
The typical factory AC in a car is usually rated at around 3 tons. Now if you are doing a van and it's been insulated etc then yeah you can get away with less. Production cars have no real thermal insulation so massive amounts of heat gain to them. Rooftop RV units are usually around 15Kbtu. |
07-30-20, 02:56 PM | #20 |
Supreme EcoRenovator
|
This debate about ice storage versus battery range is getting ridiculous! The number one challenge for current BEV solutions is range. More range=better is the rule. Anything that adds mass adds drag on the range, period. So consider this, Batman: manufacturing ice on the fly at max capacity would cost you less range than carrying a big ice cube from the starting point. With a ton or two of capacity, it doesn't take an hour to make 100 gallons of ice. NO EXTRA BAGGAGE!
I have an idea, we could go to the dollar store and buy a whole row of the 6 dollar magic air conditioner EVAP and mount them on the roof. That could subcool the refrigerant while parked or driving and DOMINATE! Or hey, why not just put PCM sound deadening interior panels everywhere, with a heat soak range of 70 to 75 degrees. I dub thee" sta-cool" interior panels. Just kidding, don't listen to my ideas... |
Tags |
hvac, van |
Thread Tools | |
Display Modes | |
|
|