EcoRenovator  

Go Back   EcoRenovator > Improvements > Geothermal & Heat Pumps
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 02-11-20, 10:46 PM   #1
Acuario
Apprentice EcoRenovator
 
Join Date: May 2011
Location: Tortosa, Spain
Posts: 198
Thanks: 2
Thanked 60 Times in 37 Posts
Question Two speed fan

I have a question..
The majority of machines I have hacked to convert to heat pumps have had single speed condenser fans. I have just 'inherited' two Fuji 7kW machines that have 2 speed fans.

My question is why two speed? What is the advantage of running the fan at a lower speed? Just energy saving?

Acuario is offline   Reply With Quote
Old 02-14-20, 10:12 PM   #2
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,348
Thanks: 367
Thanked 590 Times in 493 Posts
Send a message via Yahoo to jeff5may
Default

Many of the non-inverter units have a "low noise" mode that runs both the indoor and outdoor unit fans slower. This is sometimes used in "economy mode" as well. In low noise mode, the compressor usually runs full out on demand, but in economy mode, it runs for some amount of time before timing out for a few minutes and then restarting. Some of the stuff has a setpoint profile built in as well, where the moving parts cycle depending on fuzzy logic.
jeff5may is offline   Reply With Quote
Old 02-15-20, 12:28 AM   #3
Acuario
Apprentice EcoRenovator
 
Join Date: May 2011
Location: Tortosa, Spain
Posts: 198
Thanks: 2
Thanked 60 Times in 37 Posts
Default

Ok, thanks, that makes sense. The machine was one with conducts and the control panel does have an 'Energy save' button so I guess that's what it was for.

It doesn't sound like I need to implement the 2 speed strategy as I'm doing air to water so no inside noise and I want to reject as much cold (or heat in the summer) as possible. I'll leave it running full speed.
Acuario is offline   Reply With Quote
Old 02-15-20, 11:08 PM   #4
gadget
Helper EcoRenovator
 
Join Date: Dec 2019
Location: Northern Utah
Posts: 49
Thanks: 1
Thanked 2 Times in 2 Posts
Default

Some of those two speed systems employ techniques to lower that output of the scroll compressors even though they are running at full RPM. One method I remember is the medium pressure port.

The low speed option does increase efficiency since it lowers the number of cycles but more importantly is the increase in comfort since there is less temperature swings.
gadget is offline   Reply With Quote
Old 02-16-20, 03:16 PM   #5
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,123
Thanks: 15
Thanked 245 Times in 231 Posts
Default

Some commercial units slow down the condenser fan if cooling is still needed at lower outdoor temperatures.

__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design