EcoRenovator  

Go Back   EcoRenovator > Improvements > Renovations & New Construction
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 11-29-10, 07:24 PM   #21
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

And finished minus trim and shelves inside of the cold room


Having let it run for a week or two now I've found that the temperature inside the cold room tends to constantly be 5 degrees warmer then outside with a minimum of 4 degrees. The basement temperature fluctuates along between 17 and 21 C the outside temp has gone from -12 to +5 and the temps inside the cold room are from 4.1 to 9.4. Keep in mind that it's mostly empty space and the temp sensor is 1.5 feet from the roof. I mostly use the fan just for quick 10-20 minute cool downs after I open the door to get something. I find the door being open for 30 seconds or so is enough to bring the temps up a degree or two. but being just the air heated the fan quickly cools it back down in there.

Overall I'm happy with the project and can't wait to see how long the potatoes and carrots in there last. Feb/march and it's a complete success. In the mean time the beer/pop/juice is just fine to drink every time I've grabbed one.

All that remains is to figure out shelving and I'm going to add two more temp sensors that will connect back to the arduino for data logging. One will be near the roof roughly where the current one is and the other will be a couple feet off the ground. It feels much colder at that height.


Yesterday I did some IR measurements of the now finished wall. Outside it was 3C, inside air temp was 20.3 , the wall was 19.7, On the other side of the room 8 feet away the wall still in it's original state was 17.4C on the paneling. The bare concrete below it was 14.3. Insulating that wall was a lot of work but it's made a big difference and I'll be slowly continuing the process around the entire basement.

strider3700 is offline   Reply With Quote
Old 11-30-10, 08:15 AM   #22
gasstingy
Journeyman EcoRenovator
 
Join Date: Feb 2010
Location: Arab, AL
Posts: 491
Thanks: 109
Thanked 49 Times in 43 Posts
Default

Sweet! For shelving, I'd try to use something like wire shelving to allow air to circulate more freely after they are stocked.

Plus, I'm sure the rest of the basement is more comfortable as well. Your work looks great!
gasstingy is offline   Reply With Quote
Old 12-01-10, 10:10 AM   #23
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default



What do you call the red tape you used to tape the edges of your vapor barrier? I tried to find it the other day at the store and couldn't.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 12-01-10, 12:06 PM   #24
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

Tuck Tape.

I see a few places online refer to it as sheathing tape. All of the first few google hits on Tuck tape are Canadian so maybe american's use something different?
strider3700 is offline   Reply With Quote
Old 12-01-10, 02:20 PM   #25
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Thanks, I'll give it another shot.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 12-02-10, 11:37 AM   #26
66aCuda
Lurking Renovator
 
Join Date: Nov 2010
Location: Marianna, Arkansas
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Lowe's here in the states has it. Its made by Pella (the window people) and it comes in different widths.
Frank
66aCuda is offline   Reply With Quote
Old 12-02-10, 11:51 AM   #27
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

what do you guys normally use to tape the seems in poly? This stuff is everywhere up here.
strider3700 is offline   Reply With Quote
Old 12-02-10, 02:38 PM   #28
TimJFowler
Apprentice EcoRenovator
 
TimJFowler's Avatar
 
Join Date: Dec 2008
Location: Santa Fe, NM
Posts: 184
Thanks: 9
Thanked 12 Times in 11 Posts
Default

For comparison - the California Cooler - Resurrecting the California Cooler. Same concept, different size and climate.

It's quite interesting to see how this "old tech" is being rediscovered and brought back.

Tim
__________________
- DIY Adventures in Applied Sustainability -

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
TimJFowler is offline   Reply With Quote
Old 12-06-10, 05:02 PM   #29
TimJFowler
Apprentice EcoRenovator
 
TimJFowler's Avatar
 
Join Date: Dec 2008
Location: Santa Fe, NM
Posts: 184
Thanks: 9
Thanked 12 Times in 11 Posts
Default

FYI - another article about root cellars - The New Agtivist: Chris Chaisson wants to root around in your cellar | Grist
__________________
- DIY Adventures in Applied Sustainability -

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
TimJFowler is offline   Reply With Quote
Old 12-07-10, 12:30 AM   #30
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

They use masonry board and way more insulation then I did. If you've got the money and the space I'd totally go that way. Mine swings too far in temperature to keep me totally happy. It's good but could always be better.

strider3700 is offline   Reply With Quote
Reply


Tags
basement, cold closet

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design