EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 12-05-22, 11:21 AM   #21
WillyP
Helper EcoRenovator
 
Join Date: Jul 2020
Location: Virginia
Posts: 30
Thanks: 8
Thanked 3 Times in 3 Posts
Default

About vapor barriers. It's been beaten to death for decades now. There is an overwhelming body of empirical evidence showing that when cellulose is used a vapor barrier can actually be hazardous.

I agree. I think when using cellulose it is far better to allow it to dry. But I do have a question. Is there an interior paint that allows moisture to penetrate it, so my insulation can dry better?

WillyP is offline   Reply With Quote
Old 04-21-23, 02:04 PM   #22
MarkTrestt12
Lurking Renovator
 
Join Date: May 2022
Location: Canada
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Insulating paint, or thermal paints, are decorative coatings that are specifically designed to improve the thermal performance of a surface. Insulating paints all function in different ways, depending on the situation. Insulating paints generally come in two forms; exterior insulating paint and interior insulating paint.
__________________
Sorry, new users are not permitted to post links in their signatures.
MarkTrestt12 is offline   Reply With Quote
Old 10-04-24, 09:59 AM   #23
MarkTrestt12
Lurking Renovator
 
Join Date: May 2022
Location: Canada
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

It sounds like you're dealing with a common issue—air leaks around recessed lighting in the attic, even though your cans are "airtight" and suitable for attics with insulation. Since you're working with fire rated recessed lights, it's important to maintain safety while sealing up those leaks.

When sealing from the attic side, you mentioned using foam, but the way the spreaders are installed might make it tricky to get good coverage. Instead, consider using fire-rated silicone or latex caulk to seal the gap between the can light housing and the ceiling drywall. This will block air leaks while preserving the fire rating. You can apply the caulk with a caulking gun, and if the space is too tight, use a flexible extension tip to reach into the crevices.

If it's hard to work from the attic, sealing from the living room side is also an option. One approach is to use airtight gaskets specifically designed for recessed lights. These fit between the trim and the ceiling, creating an air seal without needing to foam around the lights themselves. Both methods should help reduce air leakage while maintaining the performance of your insulation.

__________________
Sorry, new users are not permitted to post links in their signatures.
MarkTrestt12 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design