![]() |
![]() |
#11 |
Lurking Renovator
Join Date: Mar 2018
Location: Pennsylvania
Posts: 6
Thanks: 0
Thanked 2 Times in 2 Posts
|
![]() It's worth considering the background heat in the home. I did a $100 hack on the laundry closet that captures the heat of condensation from a condensing clothes dryer. I mounted a bipole light switch wired as A/B along with a snap disk thermostat on the closet ceiling. Forward in the summer vents it through an ERV. Back in the winter vents the closet into the bathroom using a through-wall fan. The condensing dryer itself is a major energy saver in my super-tight house.
Someone here should hack a heat-pump clothes dryer. Just sayin. |
![]() |
![]() |
The Following User Says Thank You to Tpm For This Useful Post: | NeilBlanchard (03-25-18) |
![]() |
#12 |
Supreme EcoRenovator
Join Date: Sep 2012
Location: Vancouver Island,Canada.
Posts: 1,037
Thanks: 116
Thanked 100 Times in 87 Posts
|
![]() To beat the dryer losses can dry the laundry using a dehumidifier then to soften fluff for 5 minutes in the dryer. Often I hang the heavier cloths then fluff them for a few minutes when dry. A 2nd reason to hang dry is does not shrink cloths.
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#13 |
Less usage=Cheaper bills
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
|
![]() I've never had anything shrink in the dryer and I dry everything. ..although seeing the lint in the filter is a clear indication that the clothes are losing material and will wear out sooner in the process.
|
![]() |
![]() |
![]() |
#14 |
Supreme EcoRenovator
Join Date: Sep 2012
Location: Vancouver Island,Canada.
Posts: 1,037
Thanks: 116
Thanked 100 Times in 87 Posts
|
![]() Nothing shrinks for you in the dryer ?
I find that bizarre as EVERYTHING shrinks for me in the dryer especially jeans I do not put jeans in the dryer unless I have lost weight as they get too tight ![]()
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#15 |
Supreme EcoRenovator
Join Date: Sep 2012
Location: Vancouver Island,Canada.
Posts: 1,037
Thanks: 116
Thanked 100 Times in 87 Posts
|
![]() I came across a pdf that staes a 30% improvement in a ASHP COP can be realized by pre conditioning the air.
PDF is on a big system requiring 3600 CFM in fan power pushing air through three 8 inch pipes buried 5 feet deep EFFECT OF OUTDOOR AIR PRE-CONDITIONING ON ASHP PERFORMANCE USING EAHE https://www.ryerson.ca/content/dam/g...0S.%20Fung.pdf
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#16 |
Journeyman EcoRenovator
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
|
![]() I don't know if this has been mentioned here on ER, but I am hoping we see an ultrasonic dryer, in the near future. GE was supposed to be working on this.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|