EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 04-13-14, 09:19 PM   #1
thx712517
Lurking Renovator
 
Join Date: Nov 2013
Location: Atlanta
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Default Insulating hot water pipe

I'm looking to insulate the hot water pipe that comes out of our hot water heater to where it goes into the wall. About 6'-7' total, 3' of it being copper and the rest being blue PEX.

With our natural gas heater, I've been seeing a lot of conflicting information on how much insulation and what type you can use. One site will suggest fiberglass tape from where the pipe comes out of the top of the water heater, while another will say you have to go 6" up before you can wrap insulation for fear of the flue being blocked and burning the house down.

What's the highest r-value insulating material I can use to insulate the hot water pipe exiting my natural gas heater without burning the house down?

thx712517 is offline   Reply With Quote
Old 04-13-14, 09:27 PM   #2
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

Just get one of those pipe jackets at Home Depot. Anything more is well into diminishing returns.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 04-14-14, 08:32 AM   #3
Higgy
The Gardener
 
Join Date: Oct 2008
Location: Manitoba - Canada
Posts: 492
Thanks: 17
Thanked 8 Times in 7 Posts
Default

Fear of the flue being blocked? What kind of insulation are you wrapping around that pipe? LOL

But yea, just get the stuff Mike said. Don't go too expensive.

In truth, you're not going to save that much heat wrapping them up, especially if you live in a 2 story house because you can only do the basement. I've wrapped them in my old bungalow as well as my new 2 story and it does help a little, but if you stop using the hot water for more then a half an hour it's going to cool off whether it's wrapped or not.
Higgy is offline   Reply With Quote
Old 04-15-14, 12:36 AM   #4
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

Its holds heat in the water for much longer compaired to unwrapped.
oil pan 4 is offline   Reply With Quote
Old 04-15-14, 08:06 AM   #5
Elcam84
Apprentice EcoRenovator
 
Join Date: Jun 2013
Location: TX
Posts: 275
Thanks: 2
Thanked 31 Times in 24 Posts
Default

The best material to use would be rubitex. It's the black insulation that's on HVAC suction lines. The minimum thickness now is .75" but I like to use the 1" or thicker(though allot of outfits are still putting .5 on their linesets). An HVAC supply store will sell you just one stick. It will take allot more heat than the regular open cell hard foam plumbing insulation and it's flexible. It is however more expensive.
Elcam84 is offline   Reply With Quote
Old 05-15-14, 02:41 PM   #6
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

When I had my natural gas tank water heater I insulated it nearly everywhere I could. I also did the lines. You can check out my post here for more info:

http://ecorenovator.org/forum/conser...ter-pipes.html

__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design