EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Power
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 02-15-13, 11:43 PM   #21
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by Christ View Post
For testing purposes, would it be sufficient to use, maybe, some prepared RG-6? I think that's what it is.

I understand that the wire is thin and the shielding is more like aluminum foil, but how well do you think it would fare for short term beta testing type stuff?

RG-6 is cable TV cable. Mostly it uses the center conductor as it's center pin.
They call them 'F' connectors. Most are crimp type.
Aluminum shielding foil isn't the best conductor. Copper mesh is way better.
The wire gauge is small..The cable itself isn't real bad. It could handle a few amps..

But the female connectors have a very smallish contact area.
I don't think they can handle much power.

__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
The Following User Says Thank You to Xringer For This Useful Post:
Christ (02-17-13)
Old 02-17-13, 04:49 PM   #22
Christ
Apprentice EcoRenovator
 
Join Date: Aug 2009
Posts: 123
Thanks: 14
Thanked 1 Time in 1 Post
Default

Awesome. I have a couple friends who work for cable and satellite TV companies and have to build direct burial line all the time. I might be able to snag some bits from them to use for panel interconnects, etc of the higher quality stuff.

Teh last time a sat installer came out here, they used double-line coax [DirecTV] and it had a mesh copper ground sleeve on it.... come to think of it, there's over 200ft of it coiled in the root cellar... I may have to look into that. I'll have to change the ends on it, I think... no center pin, just has the wire poking through.
Christ is offline   Reply With Quote
Old 02-17-13, 06:04 PM   #23
Mikesolar
Master EcoRenovator
 
Mikesolar's Avatar
 
Join Date: Aug 2012
Location: Toronto
Posts: 958
Thanks: 40
Thanked 158 Times in 150 Posts
Default

I will only use proper solar cable because I might use strings of 13 panels which will be 500+vdc. It needs to be rated for 1000Vdc and UV rated. What is the co-ax rated for or is it even rated at all?
Mikesolar is offline   Reply With Quote
Old 02-17-13, 07:10 PM   #24
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

This is RF cable. It's not designed for DC use, therefore, there is no DC voltage or current spec.
But, people have used it at high DC & AC voltages. I've used RG8 at 2,000 volts DC @ 300 to 400 watts, with no problems.
Because of the center conductor's size, there is going to be a limitation on current.
(See the loss info above). It's current squared x R.

If you had a real long run of small size wire with 2 ohms of resistance,
the loss at 10A would be 100 x 2= 200 watts of wasted power..
But, if it was 20A, 400 x 2 = 800 watts of loss.
40A would be 3.2 kW of loss.. Those wires would be kinda warm!

Here's some RG8 info on higher voltages.

</title> <meta name="description" content="" /> <meta name="keywords" content="" /><meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" /> <meta name="author" content="Spellman High Voltage Electronics Corporation" /><meta name="distribution" c

RG8 is water proof and UV resistant. It's been used outdoors for decades (radio antenna connections).

BUT, I'm pretty sure that using any kind of coax for PV won't meet code around here..
www.senecass.com/NEC2000.pdf

I don't think any city electrical inspector would allow you to use anything
that didn't meet NEC and/or local codes.


One might use Coax for low current / high voltage for PV, during an emergency when no other cable is available.
Or, you might use it strictly for experimental research or testing to see if it
is really a safe temporary replacement for NEC approved cable.
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 02-19-13, 04:55 AM   #25
beecrofter
Lurking Renovator
 
Join Date: Nov 2012
Location: USA
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

So, how large was the fire, and did you get the coax disconnected fast ?
beecrofter is offline   Reply With Quote
Old 03-06-13, 10:20 AM   #26
berniebenz
Helper EcoRenovator
 
Join Date: Apr 2012
Location: Gardnerville, NV
Posts: 66
Thanks: 0
Thanked 3 Times in 3 Posts
Default AC vs DC circuit breakers

Quote:
Originally Posted by Xringer View Post
Is that labeled as a 220v~ 3,000 amps??
That's not really going to work with a 0.66 megawatt load is it?

What uses that much power??

~~~

An AC~ breaker that had large self-wiping contacts and
a good air-gap when open might to the job on DC.
You could try it.

On any kind of switch for DC power switching,
one thing you want is speed. It's going to arc anyways,
but if you minimize the time it's arcing, the contacts will last longer.
Circuit breakers designed for breaking AC currents use the fact that AC current goes thru zero every half AC cycle. Thus arcing is short and less destructive allowing relatively small contact seperation.

Not so for DC contacters and circuit breakers. They normally use larger and faster contact seperation and often employ magnetic arc blow out devices and power factor correction.

Last edited by berniebenz; 03-06-13 at 10:23 AM.. Reason: additional info.
berniebenz is offline   Reply With Quote
Old 03-09-13, 09:39 PM   #27
NeilBlanchard
Journeyman EcoRenovator
 
NeilBlanchard's Avatar
 
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
Default

Isn't DC capacity just based on resistance and gauge?
NeilBlanchard is offline   Reply With Quote
Old 03-09-13, 11:04 PM   #28
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by NeilBlanchard View Post
Isn't DC capacity just based on resistance and gauge?
It's all about the resistance of the wire. More resistance = more power loss.



But, if you only have small gauge wire, using higher voltage allows it to
conduct more power.

My Coax has performed pretty well at 100V at 8A..
The heat dissipation is minimal. But if I were using really small wire,
with a lot of resistance, it could get hot and even melt in half.
Attached Thumbnails
Click image for larger version

Name:	fTt2e.jpg
Views:	2432
Size:	42.5 KB
ID:	3058  
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 03-10-13, 12:59 PM   #29
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default Sun is getting higher!

Getting 800+ watts today. (from the 800w array) But, I noticed the sun is being reflected back into the house.



(Reflected sunlight should be pointed right back at the sun)..
That means I have to get on my snow shoes and go lower the angle of the array!
Wow, it's almost springtime!
Attached Thumbnails
Click image for larger version

Name:	2013-03-10 13.47.07.jpg
Views:	1154
Size:	508.7 KB
ID:	3059  
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
The Following User Says Thank You to Xringer For This Useful Post:
Christ (03-14-13)
Old 03-14-13, 01:30 PM   #30
Christ
Apprentice EcoRenovator
 
Join Date: Aug 2009
Posts: 123
Thanks: 14
Thanked 1 Time in 1 Post
Default

For maximum /panel/ efficiency, it should reflect back at the sun... BUT, seems that if you're not using all the power you can generate, it doesn't hurt to point some solar heat gain into the walls. :P

Christ is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design