EcoRenovator  

Go Back   EcoRenovator > Improvements > Appliances & Gadgets
Advanced Search
 


Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 11-21-09, 09:37 AM   #31
Ryland
Master EcoRenovator
 
Join Date: Mar 2009
Location: Western Wisconsin.
Posts: 913
Thanks: 127
Thanked 82 Times in 71 Posts
Default

Seeing as how you get more heat out of the hot side with warmer air going over the cool side, then it seems like as you cool the compressor you should have that heat heat the cold side of the heat pump, that is assuming that the compressor is only getting in the 100 degree range or so, if it's hotter then that then I would be a little worried.

Ryland is offline   Reply With Quote
Old 11-21-09, 03:30 PM   #32
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,002
Thanks: 303
Thanked 707 Times in 529 Posts
Default

Quote:
Originally Posted by Xringer View Post
I've taken out all the screws and the front panel won't pop off.
And the rear sheet metal cover (lip) is stuck inside the unmovable plastic cover!
Look for more screws.

Look underneath, see if there are any little plastic panels that will open to reveal screws, Look again on the sides. Those little screws really have a way of hiding.

If all of that fails, repeat this mantra:

"It's all for science, it's all for science, etc."

Keep repeating the mantra while you start jimmying the plastic stuff around the edges. Something's gonna start coming loose eventually. If it's all loose except for one area, look again for a screw in that area.

REMEMBER, Freon is odorless and not poisonous, or flammable but it can displace air in your lungs which can kill you. If you start hearing an angry hiss, make sure windows and doors are open and beat a hasty retreat.

You'll get all of the stuff off eventually... just go slow.


Regards,

_AC_Hacker
AC_Hacker is offline   Reply With Quote
Old 11-21-09, 03:45 PM   #33
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,867
Thanks: 106
Thanked 244 Times in 224 Posts
Default

There are only two screws on the front plastic cover. Nothing on the bottom.
I've tried jimmying around the edges and messed up the plastic.. But no joy..

Today, I dehumidified my basement for about 2.5 hours. When I remembered
I had left it on, I went down and scanned the compressor (via the vents) and
it was still about 98 deg F. Never really got that hot.
Maybe the R22 flowing inside it keeps it cool?
The test wasn't too stressful on the AC, since it's 65 down stairs already.
It wouldn't come on, until I set it for 60..

It was pumping out some real cold air, but heat from the hot coil
wasn't that impressive. Got up to about 92 and that was it.

Maybe it will do better in the summer, when it's 10 degs warmer down there..
Xringer is offline   Reply With Quote
Old 11-21-09, 10:05 PM   #34
dremd
Need More Eco
 
dremd's Avatar
 
Join Date: Sep 2008
Location: Scott, La
Posts: 168
Thanks: 2
Thanked 5 Times in 5 Posts
Send a message via AIM to dremd
Default

subscribed:

dremd is offline   Reply With Quote
Reply


Tags
heat pump, hot water

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design