06-28-12, 07:05 AM | #41 |
Helper EcoRenovator
Join Date: Dec 2009
Location: Pensacola Florida
Posts: 38
Thanks: 17
Thanked 5 Times in 4 Posts
|
I was thinking that the reason heat pump water heaters are not more popular is that the heat pump is too small compared to an electric water heater and takes too long to heat the water.
Am I missing something? |
06-28-12, 07:56 AM | #42 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
The big difference is the power (KWh) used to heat the water.
The resistive heating element uses a lot of power. (1 KWh for each 3412.142 BTU). Whereas the HP is just moving heat, out of the air, into your water tank. (Using less power per BTU). Yes, the HP is slow. So, if you are in a big hurry to take a shower, right after doing a wash, the standard hotwater heater is for you. But, if you know how to plan when you are going to shower, the HP will save you some money on power. Today, we will spent about $2 for oil, to heat our water. I think this A7 ASHP will cut that down to about $1. (If it uses 6 kw hours per day). I think the HW ASHP is not very popular because of it's initial cost. And because people know that regular HW heaters will fail, many times, within 5 or 6 years. ~~~ Today, I'm considering the size of my tank.. The A7 is good for up to 70 gal. But, if demand is low..(Ours is quite low) Maybe a smaller tank would be cheaper to run.?. Instead of a 50 gal, maybe a 40 gal tank would be more efficient? Less water, less leakage (smaller surface area of tank)=less KW hours?
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 06-28-12 at 11:45 AM.. |
06-28-12, 10:34 AM | #43 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
I don't think I've ever seen an ASHP without a resistive backup element though... It should work just as fast or very close to as fast as a normal electric heater while being more efficient.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by Daox; 06-28-12 at 12:00 PM.. |
06-28-12, 11:11 AM | #44 |
Less usage=Cheaper bills
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
|
"And because people know that HT heaters will fail, many times, within 5 or 6 years."
This is because people don't maintain the unit by replacing the anode rod or they take it out when the water gets a sulfur smell and then the tank quickly rusts out without the anode material. |
06-28-12, 11:54 AM | #45 | |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Quote:
Will HW storage tanks without any 230 power to the heater elements have problems with their anode rod? Our old 74 gallon tank started leaking because of rusted hardware, after only a few years. I was able to repair the tank, but lost interest in repairing the leaking HX, due to corroded clean-out hardware. At the time, my wife wanted the roof cleaned off for new asphalt shingles, and oil was dirt cheap.. So, we scrapped the system, as more trouble than it was worth.
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
|
06-28-12, 12:10 PM | #46 | |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Quote:
Geyser-R | Nyle Systems – Energy Saving Heat Pump Solutions (and some of the new 1 piece hybrid units) that have turned off their heating elements. One local guy who has a basement the size of mine is having great success with his Geyser, without using any 230v power.. When I want a hot shower, it's normally not an emergency. So, I can deal with the recovery time. If it was really a problem, I'll still be able to quickly burn a few bucks in oil to heat up some water quickly.. I'll just need to turn on the ASHP system's by-pass valve, and fire up the oil burner (one switch). I'm leaning towards the 40 gallon tank, since it will recover a bit faster. But, more a little more planning ahead will be required.
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
|
06-28-12, 12:47 PM | #47 |
Uber EcoRenovator
Join Date: Apr 2011
Location: Strathroy Ontario Canada
Posts: 657
Thanks: 9
Thanked 191 Times in 129 Posts
|
Xringer Wrote:
Today, we will spent about $2 for oil, to heat our water. I think this A7 ASHP will cut that down to about $1. (If it uses 6 kw hours per day Just thought I would throw a wrench in. The solar hot water we have been collecting Via flat plate panel since about April is costing us about $2.16 per month for the little circ. pump operation. Anyone could build a panel with just basic skills and plumb it into an exsisting tank. Old patio door glass some 3/8 copper tube 3/4 copper tube aluminum flashing material a little sweat presto,, no more oil. Randen |
06-28-12, 01:45 PM | #48 | |
Less usage=Cheaper bills
Join Date: Nov 2010
Location: Minneapolis, MN
Posts: 939
Thanks: 41
Thanked 116 Times in 90 Posts
|
Quote:
|
|
06-28-12, 03:05 PM | #49 | |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Quote:
Plus, I do recall periods of over-cast and rainy days when our hotwater tank dropped down under 75F. Sometimes, solar isn't so great around here.. We are a bit below average. Not so bad during the coldest part of the winter.. But, the main problem we have with solar, is the location of the panels. They would have to be located about 100 feet down hill from the point-of-use. (Wife will not allow any more panels on the roof).. The panels would be located where my PV arrays are currently installed. (I would have to get rid of the PV). The area has so much shade, it's a horrible location for PV, but shouldn't be very bad for HW solar. The area gets good sunlight 4 to 5 hours per day on average. But, I do have an idea about using the warm air in my attic (which now at 117F). I could pump hot air down from the attic during the winter to keep my basement warm (around the ASHP).. I really like the whole idea of keeping the basement warmer.. Secondly, I am currently using 800w of PV connected to a HW heating element. (Extra low efficiency). So, if I were use that 800w to power my ASHP for 4 or 5 daylight hours, that might save some money..
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 06-28-12 at 03:18 PM.. |
|
08-05-12, 03:07 PM | #50 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
This project looked like it would be fun, but it was abandoned.
I went ahead and took the easy way out with the A7 AirTap. http://ecorenovator.org/forum/geothe...er-heater.html At 7,000 BTUh, it's a bit more powerful than either one of my small window ACs.. It's likely the best way for me at this particular time.
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
|
|