Engines Propane Conversions. Lawnmower, tractors, generators, pumps, etc...

mangler · 05-18-15, 08:19 PM

This is what I was considering as a mixer, right after the air filter, at the beginning (top) of the elbow from the previous post.

1pcs LPG CNG Gas Mixer for Bi Fuel Conversion on Motorcycle | eBay

The only thing I am wondering is will there be enough air velocity to trigger some vacuum and feed propane right after the air filter?

I struggle to find a place my feed tubes/venturis lower in the elbow, near the carb. There is just no clearance to create a thicker gasket/feed plate between the air intake and the carb.

05-18-15, 08:19 PM	#22
mangler Lurking Renovator Join Date: May 2014 Location: Ontario Posts: 12 Thanks: 1 Thanked 0 Times in 0 Posts	This is what I was considering as a mixer, right after the air filter, at the beginning (top) of the elbow from the previous post. 1pcs LPG CNG Gas Mixer for Bi Fuel Conversion on Motorcycle \| eBay The only thing I am wondering is will there be enough air velocity to trigger some vacuum and feed propane right after the air filter? I struggle to find a place my feed tubes/venturis lower in the elbow, near the carb. There is just no clearance to create a thicker gasket/feed plate between the air intake and the carb.