07-20-11, 02:07 PM | #11 | |
You Ain't Me
Join Date: Nov 2009
Location: Northampton MA
Posts: 662
Thanks: 6
Thanked 71 Times in 58 Posts
|
Quote:
It's really not that hard. You just need to make sure the tanks are warm enough and shaken up a bit. Like I said earlier, I have never used the 600 board foot kits before but I have certainly used the 200 board foot kits. I hear it's harder to get every last bit out of them. Oddly enough the 600' kits costs as much as 2 x 200' kits. Remember when you're spraying to not go longer than 15 seconds before giving a squirt or you need to replace the tip. You only have a dozen or so tips in the kit but you can order more if you want. Last time I did this We managed to get through an entire 200' kit only using one nozzle. We just kept a trash can near by and gave a squirt from time to time. Remember to start counting as soon as you take your finger off the trigger. Also you can only spray a couple inches of thickness at a time so you need to make a couple passes. Oh yea, and a 200 board foot kit covers (theoretically) 200' x 12" x 12" x 1".... a board foot. YMMV. |
|
The Following User Says Thank You to S-F For This Useful Post: | gasstingy (07-20-11) |
|
|