Go Back   EcoRenovator > Introductions
Advanced Search

Blog Register 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-28-10, 10:23 AM   #11
Lurking Renovator
Join Date: May 2010
Location: Garland, Texas
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts

Actually for the tubes on the roof surface, there is usually not much of a temperature difference to drive heat transfer. The roof surface is about 120 F and the dark gray surfaces of the painted PVC tubes are about this temperature too. However, I imagine I am losing some significant heat from the tube for the length that it runs underground since the soil stays around 65 F. When I get in on a new pool installation (as opposed to a retrofit) I will specify that the heat supply tube be insulated before it is buried.

In regard to preheating domestic hot water, a WS heater would, at best, be only effective only during March to November; the period which an attic space gets above room temperature. Objectively speaking, I think that a better approach to generating domestic hot water would be to use a glazed 2-D nonimaginging solar concentrator. Such a collector could produce high temperatures practically anytime the sun is up. There is an article about these nonimagining concentrators in the March 1991 Scientific American, in addition to the book by Joseph O'Gallagher I mentioned in one of my other posts.

Last edited by cmroseberry; 06-05-10 at 09:12 AM.. Reason: removed full proper name
cmroseberry is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design