EcoRenovator  

Go Back   EcoRenovator > Improvements > Biofuels
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 02-23-15, 01:42 PM   #1
MarkM66
Helper EcoRenovator
 
Join Date: Jan 2012
Location: st.louis
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Default Surplus Alchohol Solution

I have access to a surplus of alcohol solutions. Either 70% Isopropanol or 70% Ethyl Alcohol.

Can someone think of a way to actually use this stuff? Is there a heater that it can be used in to heat a garage or something? Maybe mix it with something else then burn it?

It flashes around 70 degrees F.

MarkM66 is offline   Reply With Quote
Old 02-23-15, 02:51 PM   #2
Piwoslaw
Super Moderator
 
Piwoslaw's Avatar
 
Join Date: May 2009
Location: Warsaw, Poland
Posts: 964
Thanks: 189
Thanked 111 Times in 87 Posts
Default

Sorry for the off-topic, but this is the first time I see someone complaining that they have too much alcohol and don't know what to do with it

Seriously: Maybe mix it with gasoline to clean emissions?
__________________
Ecorenovation - the bottomless piggy bank that tries to tame the energy hog.
Piwoslaw is offline   Reply With Quote
Old 02-26-15, 10:27 AM   #3
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 724 Times in 534 Posts
Default

Quote:
Originally Posted by MarkM66 View Post
I have access to a surplus of alcohol solutions. Either 70% Isopropanol or 70% Ethyl Alcohol...
I think that 70% has too much water to be useful as a fuel.

You could re-distill to a higher concentration of alcohol, and then use it for fuel.


-AC
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Old 02-26-15, 10:48 PM   #4
philb
Apprentice EcoRenovator
 
Join Date: Nov 2010
Location: Oklahoma City
Posts: 155
Thanks: 58
Thanked 17 Times in 14 Posts
Default

Donate them to your local health clinic or Salvation Army or ...you get the idea. Both are excellent disinfectants.
Chemistry labs sometimes use them for burners. You could do the same.
philb is offline   Reply With Quote
Old 02-27-15, 07:08 AM   #5
MarkM66
Helper EcoRenovator
 
Join Date: Jan 2012
Location: st.louis
Posts: 33
Thanks: 0
Thanked 1 Time in 1 Post
Default

I actually have received 100% Isopropanol before. With that I would put a few gallons in my gas tank at every fill up. Worked fine.

I don't think this stuff would work as well. Don't really want to risk it. I have put some in my wiper fluid though.
MarkM66 is offline   Reply With Quote
Old 03-05-22, 07:02 PM   #6
dguzzi
Helper EcoRenovator
 
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
Default

It would work as an antifreeze in a geothermal loop or experiments related?
dguzzi is offline   Reply With Quote
Old 03-06-22, 05:38 PM   #7
philb
Apprentice EcoRenovator
 
Join Date: Nov 2010
Location: Oklahoma City
Posts: 155
Thanks: 58
Thanked 17 Times in 14 Posts
Default

If you have enough to justify the cost of a $100 stainless steel still, you could always use it in your vehicle. At the current price if $4.75 for a gallon of gas here, that's what I'd do.
philb is offline   Reply With Quote
Old 03-10-22, 04:13 PM   #8
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,431
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

Uhmm anything above about 50 percent will burn.
jeff5may is offline   Reply With Quote
Old 03-10-22, 09:46 PM   #9
philb
Apprentice EcoRenovator
 
Join Date: Nov 2010
Location: Oklahoma City
Posts: 155
Thanks: 58
Thanked 17 Times in 14 Posts
Default

I’d want the alcohol as close to 100% as I could put it in my vehicle because some moisture and water will fall out in the tank. I got the old Briggs and Stratton engines to run on 60% alcohol easy enough by adjusting the mixture screw.
philb is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design