EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 01-30-09, 02:11 PM   #1
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default Clothes dryer heat recovery system

So, the attic project is winding down and I am looking for something new to do. I was reading a post here the other day about guys venting their dryers back into their houses and was thinking to myself how I wish I could do that. I don't think there is a day that goes by where my dryer isn't running in the winter. But, I have a gas dryer, so that isn't an option for me. Also, I'm not a huge fan of the amounts of water vapor is put into the air doing it. Especially when I think of the pains you go through trying to seal up your house.

So I was trying to think of a way to do this, and this is what I came up with. It really is pretty simple and eliminates the moisture problem. Start with aluminum dryer ducting and weld some aluminum fins on it. Thats it. You get yourself a relatively badly designed heat exchanger. But, its still a step up from aluminum tube, and a big step up from my current setup of wire reinforced plastic tubing. Perhaps adding a thermostatically controlled fan to blow over it when it heats up would increase efficiency.

Anyway, here are some pics.



Top view.

Attached Thumbnails
Click image for larger version

Name:	dryervent1.JPG
Views:	15557
Size:	25.0 KB
ID:	84   Click image for larger version

Name:	dryervent2.JPG
Views:	13381
Size:	35.9 KB
ID:	85  
Daox is offline   Reply With Quote
Old 01-30-09, 03:26 PM   #2
cmittle
Helper EcoRenovator
 
Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 56
Thanks: 0
Thanked 1 Time in 1 Post
Default

I like the idea. I wonder if there's a way to attach the fins that would allow for people without a welder, but still maintain the conductivity.

Out of curiosity did you use Sketchup for the model??
cmittle is offline   Reply With Quote
Old 01-30-09, 03:32 PM   #3
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

I used SolidWorks because I use it professionally. I have played with Sketchup, but I'm far more proficient in SW.

I inquired with a few guys at work about thermal adhesives. I'm sure you could do it with a thermal epoxy of some sort. Welding happens to be easier for me.
Daox is offline   Reply With Quote
Old 01-30-09, 06:09 PM   #4
knowbodies
Home Improvement Goon
 
Join Date: Oct 2008
Location: Moose Jaw, SK, CA
Posts: 96
Thanks: 0
Thanked 2 Times in 2 Posts
Default

That looks like a lot of work. Why not just hang your clothes to dry? Wire clothes racks are very cheap. Put it beside your furnace and your laundry will dry in a few hours.
knowbodies is offline   Reply With Quote
Old 01-30-09, 06:38 PM   #5
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

My basement is pretty small and has a real low ceiling. I'd love to hang clothes down there, but it just wouldn't be real practical. If it was just me and my wife in the house I'd try to make due with lines downstairs, but we have five others in the house right now.
Daox is offline   Reply With Quote
Old 01-30-09, 06:49 PM   #6
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Here is the current setup. As I mentioned it uses the plastic/wire ducting which I hear is really not the best stuff to use period.








To the right of the dryer I put a temp sensor on the table (far right end of the table). I'll monitor the temps to see how cold it stays down there.
Attached Thumbnails
Click image for larger version

Name:	house002.jpg
Views:	15411
Size:	44.6 KB
ID:	86   Click image for larger version

Name:	house003.jpg
Views:	12956
Size:	48.0 KB
ID:	87   Click image for larger version

Name:	house005.jpg
Views:	12975
Size:	41.3 KB
ID:	88   Click image for larger version

Name:	house006.jpg
Views:	13429
Size:	45.5 KB
ID:	89  

Last edited by Daox; 01-30-09 at 06:58 PM..
Daox is offline   Reply With Quote
Old 01-30-09, 07:50 PM   #7
dremd
Need More Eco
 
dremd's Avatar
 
Join Date: Sep 2008
Location: Scott, La
Posts: 172
Thanks: 2
Thanked 6 Times in 6 Posts
Send a message via AIM to dremd
Default

How about if you instal that heat exchanger in to a larger pipe, then used forced air to boost output?
dremd is offline   Reply With Quote
Old 01-31-09, 01:15 PM   #8
Higgy
The Gardener
 
Join Date: Oct 2008
Location: Manitoba - Canada
Posts: 492
Thanks: 17
Thanked 8 Times in 7 Posts
Default

Not to sidetrack anything, but your basement looks like the inside of a Tatooine homestead from Star Wars.

...that is all.
Higgy is offline   Reply With Quote
Old 02-02-09, 09:39 AM   #9
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

dremd, I had thought about that, but I'd really like to keep this as simple as possible. Thats why I am considering just turning on a fan when the dryer is on. Thermostatically controlled would be great, but how hard would it be to just turn the fan on when you turn the dryer on?

I also talked to the guy who I was planning on using his TIG welder. He suggested looking for another way of putting it together as his doesn't weld aluminum very well. So, I'm looking into thermal epoxy and alternatives now. I did find this link while googling for thermal epoxy. Looks like a descent idea to me. Just have to make sure the epoxy will stick to aluminum.

Need Thermal Epoxy? - Make Your Own
Daox is offline   Reply With Quote
Old 02-17-09, 10:38 AM   #10
gascort
Helper EcoRenovator
 
Join Date: Feb 2009
Location: Saint Louis, MO
Posts: 59
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Higgy View Post
Not to sidetrack anything, but your basement looks like the inside of a Tatooine homestead from Star Wars.
I was thinking, what a neat/weird looking basement too!

Daox, I have a better idea for you - I've been planning to do it all winter, but it's been super busy and I haven't even modded my car in months.

The way I see it, the dryer really has two problems.
1. you pump lots of humid, warm air outside, leaving lots of E to be recaptured
2. removal of air from your home = lower air pressure inside, inducing drafts until pressure reaches equilibrium.

Your method addresses problem 1, but not problem 2. my idea will attack both.

Use metal dryer vent, regular style with the ridges.
In the window where your exhaust air goes out, make another hole for an inlet tube.
Using some 2 or 3 inch pvc, set up an intake to draw cold outside air from a location sufficiently distant from the humid (natural gas exhaust in your case) air exiting your vent - maybe a meter or so?
Around the outside of your 4 inch dryer vent, (I think that's the size) install a 5 inch piece of hvac duct to run the straight length of it.
Connect your inlet tube to the 5 inch duct nearest the window, and ensure that the other end of the inlet is close to the dryer's intake.

Probably want to install a dryer vent "flapper" on the inside of the intake to ensure flow only during operation, and a screen or other guard on the outside to keep critters out. Probably also wrap the hvac duct in insulation.

You could make this design as simple or complex as you wish - from the other stuff you've gone after on your car, I assume you'd be going after the complex version.
For a simpler way, just use two pieces of long metal dryer vent and wrap them around one another - I don't know how well this would work though.

I got the idea from my background in biology and physics and thinking about countercurrent flow in fish gills / thermodynamic systems. Here's a wiki link.
Countercurrent exchange - Wikipedia, the free encyclopedia

I also plan on doing this with my furnace, which is a riskier proposition - need to keep the exhaust air hot enough that it still flows up the flue and out of the house, and also need to figure out what to do with condensation inside the pipe!

gascort is offline   Reply With Quote
Reply


Tags
dryer, heat recovery

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design