EcoRenovator  

Go Back   EcoRenovator > Improvements > Appliances & Gadgets
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 12-28-10, 03:03 PM   #1
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default can anyone help understanding my hotwater heater label?

I'm trying to figure out roughly how much power it pulls. On the label it says

watts Upper/SUP 3800/2850 Lower/INF 3800/2850 Total 3800/2850

why the two ratings for each element and why is the total not the sum of each?

strider3700 is offline   Reply With Quote
Old 12-30-10, 10:20 AM   #2
cbarbie
Lurking Renovator
 
Join Date: Mar 2010
Posts: 7
Thanks: 0
Thanked 3 Times in 1 Post
Default

Difficult to answer about the dual ratings. Can you provide the manufactuer name and model #.

My educated guess would be the 3800/2850 watts is dependent upon the voltage applied to the element.

watts voltage current resistance
3800 240 15.833 15.158
2854 208 13.722 15.158


As far as "total not the sum of each", water heaters are typically wired so that only one element is on at a time. The top one comes on 1st. Once the top of the tank is hot, the top thermostat move the power from the top element to the lower element.
cbarbie is offline   Reply With Quote
The Following 3 Users Say Thank You to cbarbie For This Useful Post:
Daox (12-30-10), Ryland (12-30-10), strider3700 (12-30-10)
Old 12-30-10, 11:41 AM   #3
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

THanks, that makes total sense. Somewhere I have the wiring diagram for the heater. I'll check to see if it is set up so that both are never on at the same time.

it's a Rheem pe40t9cb00

Hmm I guess that means my estimates of power usage of 5k are far too high. Time to redo the spread sheets.
strider3700 is offline   Reply With Quote
Old 12-30-10, 01:24 PM   #4
cbarbie
Lurking Renovator
 
Join Date: Mar 2010
Posts: 7
Thanks: 0
Thanked 3 Times in 1 Post
Default

You are welcome. I could not find any info on your model.

If you want to make your estimate more accurate, measure the voltage and amperage going to the water heater. You should measure it at the breaker panel. Watts = Volts * Amps.

If you do not have a clamp-on amp meter, then use this formula:
Watts = Volts * Volts / Resistance(15.158 from previous post)

The voltage coming into my house varies by 10 volts according to the time of year.

examples:
240v = 3800w
230v = 3490w
220v = 3193w

Over a weeks time that adds up.

cbarbie is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design