Any low Flow Bath tub faucets? - Page 2

oil pan 4 · 06-21-15, 10:13 AM

Install a globe valve in series with the hot and cold water lines. Close the globe valve and set any flow rate you so desire.
Put the globe valve where you can reach them just in case they should start leaking some day. Make them accessible from the basement for put them behind an access panel.

AirSepTech · 06-21-15, 12:30 PM

I wanted a higher shower head, I am tall.

Wife has the same water addiction as stated, needed an easier leg method(we get the AARP Mail),and wanted an easier tub cleaning, and washing her wiener(dog) Ms MaggyMay.

Waterpik Medallion 5-Spray Hand Showerhead in Brushed Nickel-LAT-569 - The Home Depot

We have the crappy 1 handle, fullflow to get hot flow type faucet, too much trouble to swap. The only way is to restrict flow.

It is not the same exact brand shown, but it does:
Restrict/adjust flow at any temp.
Shut completely off.
Adjust pattern x5
Has worked well for 5 years

It was not a cheap unit, 125or150 IIRC. I think the dog likes it most, you touch that handle, she jumps in the tub.

Good Luck

06-21-15, 12:30 PM	#12
AirSepTech Lurking Renovator Join Date: Jan 2010 Location: Elko,Nv.& Boise,Id. Posts: 19 Thanks: 0 Thanked 1 Time in 1 Post	All winners here I wanted a higher shower head, I am tall. Wife has the same water addiction as stated, needed an easier leg method(we get the AARP Mail),and wanted an easier tub cleaning, and washing her wiener(dog) Ms MaggyMay. Waterpik Medallion 5-Spray Hand Showerhead in Brushed Nickel-LAT-569 - The Home Depot We have the crappy 1 handle, fullflow to get hot flow type faucet, too much trouble to swap. The only way is to restrict flow. It is not the same exact brand shown, but it does: Restrict/adjust flow at any temp. Shut completely off. Adjust pattern x5 Has worked well for 5 years It was not a cheap unit, 125or150 IIRC. I think the dog likes it most, you touch that handle, she jumps in the tub. Good Luck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-21-15, 10:13 AM	#11
oil pan 4 Land owner Join Date: Nov 2012 Location: NM Posts: 1,026 Thanks: 12 Thanked 127 Times in 107 Posts	Install a globe valve in series with the hot and cold water lines. Close the globe valve and set any flow rate you so desire. Put the globe valve where you can reach them just in case they should start leaking some day. Make them accessible from the basement for put them behind an access panel.