![]() |
![]() |
#41 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Good to hear Darin. Have you tried it with the two batteries yet?
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#42 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() Ask and ye shall receive...
I trimmed off the plastic standoffs that held the slightly narrower 28 Ah OEM battery in place, and the pair of 12 Ah ones fit in perfectly, not a millimeter to spare! That makes me wonder if the mower may have been originally designed to possibly take two 12 Ah batteries. Haven't fired it up yet, though. Next I need to make up some wire connectors to hook everything together.
__________________
.
|
![]() |
![]() |
![]() |
#43 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() "Idle test" - 2 x 12 Ah ...
Once the motor RPM stabilizes, it's only pulling 4.8 amps @ 12.3 volts from the pack of 2 x 12 Ah batteries. That's good enough! Edit: CORRECTION - I was only measuring current off one battery. So it's more like 9.6 amps for the pair. Time for a mowing test! I just have to solder a couple of the conectors I made first. Not today though - stinking hot out. Maybe tomorrow morning before things get too toasty...
__________________
.
|
![]() |
![]() |
![]() |
#44 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Wow, thats only 60W of power. Any chance you could get readings while cutting?
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#45 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() I'm going to try
__________________
.
|
![]() |
![]() |
![]() |
#46 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Any chance you could get a picture of the blades on that thing? I'm curious as to how it idles at such low power.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#47 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() Oops!
Current draw is not as low as I reported before. I was only measuring from one of the 2 batteries, so you have to double it for accurate numbers: 9.6 amps, not 4.8. (I edited the previous post.) Also, looks like the mower is at least 13 years old, since it was built at the local Black and Decker plant which closed in 1998 (source: Stephen Covey, 55 - Brockville Recorder and Times - Ontario, CA )
__________________
.
|
![]() |
![]() |
![]() |
#48 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() Mowing test: success!
14 minutes mowing time without drawing the pack voltage below 10.5 - that's enough to do 75% of the lawn (100% of the big section), of moderate length & dampness. This was fresh off the charger, but I don't believe the pack was fully charged. At least the LED indicators hadn't changed in all the time it was plugged in (both red & green showing - I'd expect the red to go out when it's fully charged, but I don't know this for sure). The pack voltage was 14.0 when I unplugged it and gave it a try. So it must have been pretty darned close to full.
__________________
.
|
![]() |
![]() |
![]() |
#49 | |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() Aha! Found some useful charging info from Black & Decker (haven't been able to find a manual online)...
Quote:
The charger itself is "dumb" - it just puts out a constant 1.7 amps. But the circuit board in the mower itself shunts charging current into a finned heat sink, presumably once battery voltage rises above a set point ("75% of full capacity"), so as not to cook the battery during the final 25%. Not a very efficient use of charging power. So around lunch time tomorrow, it should be fully charged. Well, sooner than that since this "replacement" pack is smaller than OEM, plus the actual capacity is lower because the batteries are roughly 2/3 worn out.
__________________
.
|
|
![]() |
![]() |
![]() |
#50 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Interesting. Are you using a kill a watt to measure the power it takes to recharge?
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
|
|