WMO burner/heater - Page 2

jeff5may · 11-03-15, 06:36 AM

Don't be shy. What you are doing is very useful and interesting.

Fordguy64 · 11-03-15, 10:19 AM

Well I added a new photo to my album on here. My phone crashes when I try to add the photo to the post but it shows the basic idea of the heat exchanger.

Daox · 11-03-15, 11:58 AM

I added a few of the pics in your album to your post for you. This is a very interesting project.

Can you tell us a bit more about the burner itself?

The centrifuge would also be very interesting to see and hear about.

Fordguy64 · 11-03-15, 05:15 PM

thanks for adding them.

here is another video of just the burner running

https://youtu.be/q1div6g1yho

this is the part number for the nozzle im using 30609-2 and the nozzle body is 17147
those are the only parts i have bought so far. everything else has been stuff i have had on hand.

i will work on the details of the centrifuge soon.

Daox · 11-03-15, 05:19 PM

Is it really as loud as the video makes it seem?

Fordguy64 · 11-03-15, 07:55 PM

its not that loud but it does make some noise. thats actually something ive noticed about the videos too not sure what it is about my phone that makes it seem so loud

so today i was messing around with some different burner designs.. i came up with this, basically it goes from 2.125" tube to 1.125" tube. the video doesn't really do it justice but it really focuses the flame into a longer skinner flame and i think i like that better

https://youtu.be/o16Y4BINhgs

Daox · 11-03-15, 09:42 PM

Perhaps if you can talk a little it'll put the sound into perspective.

Robaroni · 11-05-15, 07:28 AM

Ford Guy,
I like the idea but how do you regulate the temperature? Once the water gets to about 120 to 125F I'd want to shut off the burner. Is there an easy way to automatically turn it back on when the temp drops below a specific level? It seems to me these are a little tough to get going.

Rob

Fordguy64 · 11-05-15, 07:16 PM

Daox i made a video but you cant really hear me haha but im pretty soft spoken so ill try again this weekend hopefully and ill got over my "silent" air compressor and the centrifuge at the same time.

Rob my plan is to heat water and then pump it into the house into a heat exchanger. This is also part of the reason i went with the smaller nozzle so i could just load up the fuel reservoir start the burner and pump and walk away.

the water tank will probably remain an open system at least at this point just so i dont have to worry about a tank exploding if something happens

also i think i have finally decided on a burner design. over the last few weeks i have been tweaking the burner a little and im finally happy. it lights up easy gets hot fast and burns clean!

Robaroni · 11-06-15, 05:44 AM

Quote:

Originally Posted by Fordguy64

Daox i made a video but you cant really hear me haha but im pretty soft spoken so ill try again this weekend hopefully and ill got over my "silent" air compressor and the centrifuge at the same time.

Rob my plan is to heat water and then pump it into the house into a heat exchanger. This is also part of the reason i went with the smaller nozzle so i could just load up the fuel reservoir start the burner and pump and walk away.

the water tank will probably remain an open system at least at this point just so i dont have to worry about a tank exploding if something happens

also i think i have finally decided on a burner design. over the last few weeks i have been tweaking the burner a little and im finally happy. it lights up easy gets hot fast and burns clean!

Interesting, do you still have to prime the burner with kerosene to get it started?

11-03-15, 10:19 AM	#12
Fordguy64 Journeyman EcoRenovator Join Date: Oct 2011 Location: Cincinnati ohio Posts: 338 Thanks: 40 Thanked 35 Times in 31 Posts	Well I added a new photo to my album on here. My phone crashes when I try to add the photo to the post but it shows the basic idea of the heat exchanger. Last edited by Daox; 11-03-15 at 11:49 AM.. Reason: added pics

11-03-15, 11:58 AM	#13
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	I added a few of the pics in your album to your post for you. This is a very interesting project. Can you tell us a bit more about the burner itself? The centrifuge would also be very interesting to see and hear about. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

11-03-15, 05:19 PM	#15
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Is it really as loud as the video makes it seem? __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

11-03-15, 09:42 PM	#17
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Perhaps if you can talk a little it'll put the sound into perspective. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

11-03-15, 06:36 AM	#11
jeff5may Supreme EcoRenovator Join Date: Jan 2010 Location: elizabethtown, ky, USA Posts: 2,431 Thanks: 431 Thanked 619 Times in 517 Posts	Don't be shy. What you are doing is very useful and interesting.

11-03-15, 05:15 PM	#14
Fordguy64 Journeyman EcoRenovator Join Date: Oct 2011 Location: Cincinnati ohio Posts: 338 Thanks: 40 Thanked 35 Times in 31 Posts	thanks for adding them. here is another video of just the burner running https://youtu.be/q1div6g1yho this is the part number for the nozzle im using 30609-2 and the nozzle body is 17147 those are the only parts i have bought so far. everything else has been stuff i have had on hand. i will work on the details of the centrifuge soon.

11-03-15, 07:55 PM	#16
Fordguy64 Journeyman EcoRenovator Join Date: Oct 2011 Location: Cincinnati ohio Posts: 338 Thanks: 40 Thanked 35 Times in 31 Posts	its not that loud but it does make some noise. thats actually something ive noticed about the videos too not sure what it is about my phone that makes it seem so loud so today i was messing around with some different burner designs.. i came up with this, basically it goes from 2.125" tube to 1.125" tube. the video doesn't really do it justice but it really focuses the flame into a longer skinner flame and i think i like that better https://youtu.be/o16Y4BINhgs

11-05-15, 07:28 AM	#18
Robaroni Journeyman EcoRenovator Join Date: Jun 2013 Location: Delhi, NY Posts: 332 Thanks: 20 Thanked 53 Times in 40 Posts	Ford Guy, I like the idea but how do you regulate the temperature? Once the water gets to about 120 to 125F I'd want to shut off the burner. Is there an easy way to automatically turn it back on when the temp drops below a specific level? It seems to me these are a little tough to get going. Rob

11-05-15, 07:16 PM	#19
Fordguy64 Journeyman EcoRenovator Join Date: Oct 2011 Location: Cincinnati ohio Posts: 338 Thanks: 40 Thanked 35 Times in 31 Posts	Daox i made a video but you cant really hear me haha but im pretty soft spoken so ill try again this weekend hopefully and ill got over my "silent" air compressor and the centrifuge at the same time. Rob my plan is to heat water and then pump it into the house into a heat exchanger. This is also part of the reason i went with the smaller nozzle so i could just load up the fuel reservoir start the burner and pump and walk away. the water tank will probably remain an open system at least at this point just so i dont have to worry about a tank exploding if something happens also i think i have finally decided on a burner design. over the last few weeks i have been tweaking the burner a little and im finally happy. it lights up easy gets hot fast and burns clean!