![]() |
![]() |
#11 |
Lurking Renovator
Join Date: Sep 2008
Location: Savannah, Georgia
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hey, dcb (hey those are my initials, too), that's the exact same motor/switch that I bought surplus some time ago for converting a push mower, so it should be the same power range as what you are looking for. The only difference is mine came with a yoke to attach a blade.
Be sure to weld in a cross brace behind the motor and attach supports for that third mounting hole to it. It won't hold long just attached to the handle like that. Otherwise, it's looking good! |
![]() |
![]() |
![]() |
#12 |
avid DIY'r
Join Date: Sep 2008
Location: MS. Gulf Coast
Posts: 154
Thanks: 0
Thanked 1 Time in 1 Post
|
![]() did you weigh it before and now after?
Looking at the pics it looks like you lightened it up a bit. |
![]() |
![]() |
![]() |
#13 |
Infrequent noob
Join Date: Aug 2008
Location: 1000 Islands region, Ontario, Canada
Posts: 402
Thanks: 37
Thanked 20 Times in 19 Posts
|
![]() Cool project, dcb. Subscribed!
__________________
.
|
![]() |
![]() |
![]() |
#14 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Minor progress, found a belt at grainger, a 3l390 , hopefully it is strong enough.
still need to weld pully together and beef up motor mounting. Actually ran it for a tiny bit though (till the pulley unbolted itself) ![]() Will need some alignment tweaks too: |
![]() |
![]() |
![]() |
#15 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() They say the snow is coming so I dusted off the welder and sorted out the pully/motor arrangements.
The pulley was two pieces so I welded it at the seam, sort of, from the inside. First welding in many years. Then I held the pulley on the motor with a bolt and adjusted the runout and knocked it straight within a few tries and deposited much welding wire ![]() It should be mostly braces and alignment from here. |
![]() |
![]() |
![]() |
#16 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Ok, it is together enough for me to want to try it
![]() This is your basic piece of threaded rod and a few angle brackets and a piece of metal strapping approach. It sounds faster than the original at top speed, starts up like an amusement ride. I'm a little nervous around it ![]() |
![]() |
![]() |
![]() |
#17 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Cover Cobbled
![]() That makes me feel a little safer, Now where is that snow? |
![]() |
![]() |
![]() |
#18 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Looks all ready to go. I hope it holds together. I wonder if it'll work better with the higher speed?
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#19 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Alllrightee
![]() Had a couple inches this morning, first test was quite manageable. I blew one circuit breaker and had to move to another circuit. But it is a lot quieter and smoother. It also has noticeably less torque ![]() |
![]() |
![]() |
![]() |
#20 |
Lurking Renovator
Join Date: Sep 2008
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Followup,
The snow got a lot wetter towards the end. I was really overtaxing the motor, was packing snowballs on it to get it to quit smoking so much while trying to finish up. ![]() This rig is overheating with 2 inches of wet snow. The blade speed is about right so it probably needs more motor. I managed to finish but had to let the motor rest a few times. plow stick would have been about as effective. Ah well, a $30 experiment ![]() |
![]() |
![]() |
![]() |
Tags |
electric, snowblower |
|
|