VIZIO D43-D2 D-Series 43" 1080p 120Hz - Page 2

Xringer · 01-22-17, 12:25 PM

Maybe with the brightness turned down really low.. But not the way I've been watching it.
It looks like 200 ma in sleep mode and about 60 watts in normal viewing mode.

I'm getting rid of my $1,354.87 (02/10/2007) EDTV today.. For $100
plus I have to help move the old 27" NEC tv (100+ pounds)..
The EDTV is only 70 pounds. My neighbor across the street is the buyer.

400W vs 60W = Using 80-85 percent less power? I like it..

warmwxrules · 01-28-17, 11:24 AM

My 50" Panasonic (1080p120hz) from a few years back uses around 75 to 80watts. My 24 inch computer monitor uses 19 watts.

Xringer · 01-28-17, 01:16 PM

We are loving this 60W TV, but when I checked the FIOS STB, it's using 20W all the time!
The STB in the bedroom is on a switch, so it's not a vampire..
So, it looks like I need a remote switch for the den STB or use a timer..
I don't want to use a timer, since the over-ride will be problematic for my wife..

But, if I could use a timer with voice over-ride from an Amazon Echo Dot..?..
That would be the Bee's Knees..

celblazer · 01-29-17, 10:18 AM

Sounds like you need to get into home automation. A Smartthings hub and an smart outlet and your set. It would work by both a timer and Alexa voice for override, I love saying "computer"(yup they added it as a wake word) turn on TV and having my screen come down, projector turn on and sound system fire up. You can also pause and change channels with Alexa and a Harmony remote.

And the harmony remote will tie into ST and turn on/off the outlet automatically for you.

pinballlooking · 01-29-17, 10:51 AM

I have had some home automation for a long time. But there are some new products that you get in cheaper than when I jumped in.

Here a couple products that you can look at. It is cool for just a couple dollars you can get energy usage monitoring. I would say that feature is a bargain.

These seem to get better reviews.
https://www.amazon.com/gp/product/B0..._i=13575750011

https://www.amazon.com/WeMo-Switch-S.../dp/B00BB2MMNE

Xringer · 01-29-17, 02:59 PM

You guys must have ESP.. I've been thinking about this Home Automation stuff all day.!.
I understand there are a lot of security concerns and that a consortium of companies is working on an 'open' protocol and strong encryption.. The encryption is going to be the most difficult. For the RF controlled devices, I assume they with go with frequency-hopping or other anti-jam RF system..

In my estimation, it's going to take some time before the final product hits the market. Maybe have some encryption that will force hackers to buy a Cray SuperComputer, before they can break in..

Anyways, I need to update my security system too.. So I'm going to wait about a year to see if I can jump in at the right point in time..

In the mean time, I still use X10 and would like to put them under the
control of my Echo Dot "Computer".. Which I think might be possible on 433 Mhz.
Using a low cost RF & IR blaster..
https://www.amazon.com/dp/B01GIXZDKO

Maybe learn to use IFTT to control the (IR) Sanyo in the den?
Get myself ready for the real deal when the time comes.. If it does....

pinballlooking · 01-29-17, 03:21 PM

I don’t think one outlet is committing too much. You could still get one outlet wait and see where everything is going to work out.

I don’t think hackers want to take over your outlet.
My gateway has been exposed to the internet for a years and no hacker has taken it over so far.
One outlet would be a fun way to try it out. We like the amazon echo home automation integration so much I added a dot in my bedroom. We have Alexa turn lights on and off many times each day it is the most useful thing about her. My wife likes music and to-do list.

I have something like this in my bedroom. It works fine but I would rather have a dot controlled outlet.
It is another option.
https://www.walmart.com/ip/Power-Str...&wl13=&veh=sem

Xringer · 01-29-17, 04:16 PM

It does look quick and easy.. But, I have a spare X10 AM466 for the STB, sitting here, ready to use..
Plus, I have three more AM466 modules connected to stuff I would like to control,
maybe using a little logical home automation skills..

I think the $30 Broadlink thing might be fun to experiment with..
Broadlink RM Pro Smart Home Intelligent Wi-Fi IR+RF Universal Remote Control EU | eBay

pinballlooking · 01-29-17, 04:23 PM

Yes it always better to use stuff you laying around than buying new stuff.
Let us know how it works out.

celblazer · 01-29-17, 07:20 PM

I know on the Smartthings community someone integrated X10 into it. Not sure how deeply but might be an option to keep your old stuff and have it work with Alexa and ST.

01-22-17, 12:25 PM	#11
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	Maybe with the brightness turned down really low.. But not the way I've been watching it. It looks like 200 ma in sleep mode and about 60 watts in normal viewing mode. I'm getting rid of my $1,354.87 (02/10/2007) EDTV today.. For $100 plus I have to help move the old 27" NEC tv (100+ pounds).. The EDTV is only 70 pounds. My neighbor across the street is the buyer. 400W vs 60W = Using 80-85 percent less power? I like it.. Attached Thumbnails __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

01-28-17, 01:16 PM	#13
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	We are loving this 60W TV, but when I checked the FIOS STB, it's using 20W all the time! The STB in the bedroom is on a switch, so it's not a vampire.. So, it looks like I need a remote switch for the den STB or use a timer.. I don't want to use a timer, since the over-ride will be problematic for my wife.. But, if I could use a timer with voice over-ride from an Amazon Echo Dot..?.. That would be the Bee's Knees.. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

01-29-17, 10:51 AM	#15
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I have had some home automation for a long time. But there are some new products that you get in cheaper than when I jumped in. Here a couple products that you can look at. It is cool for just a couple dollars you can get energy usage monitoring. I would say that feature is a bargain. These seem to get better reviews. https://www.amazon.com/gp/product/B0..._i=13575750011 https://www.amazon.com/WeMo-Switch-S.../dp/B00BB2MMNE __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-29-17, 02:59 PM	#16
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	You guys must have ESP.. I've been thinking about this Home Automation stuff all day.!. I understand there are a lot of security concerns and that a consortium of companies is working on an 'open' protocol and strong encryption.. The encryption is going to be the most difficult. For the RF controlled devices, I assume they with go with frequency-hopping or other anti-jam RF system.. In my estimation, it's going to take some time before the final product hits the market. Maybe have some encryption that will force hackers to buy a Cray SuperComputer, before they can break in.. Anyways, I need to update my security system too.. So I'm going to wait about a year to see if I can jump in at the right point in time.. In the mean time, I still use X10 and would like to put them under the control of my Echo Dot "Computer".. Which I think might be possible on 433 Mhz. Using a low cost RF & IR blaster.. https://www.amazon.com/dp/B01GIXZDKO Maybe learn to use IFTT to control the (IR) Sanyo in the den? Get myself ready for the real deal when the time comes.. If it does.... __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

01-29-17, 03:21 PM	#17
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I don’t think one outlet is committing too much. You could still get one outlet wait and see where everything is going to work out. I don’t think hackers want to take over your outlet. My gateway has been exposed to the internet for a years and no hacker has taken it over so far. One outlet would be a fun way to try it out. We like the amazon echo home automation integration so much I added a dot in my bedroom. We have Alexa turn lights on and off many times each day it is the most useful thing about her. My wife likes music and to-do list. I have something like this in my bedroom. It works fine but I would rather have a dot controlled outlet. It is another option. https://www.walmart.com/ip/Power-Str...&wl13=&veh=sem __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-28-17, 11:24 AM	#12
warmwxrules Helper EcoRenovator Join Date: Nov 2011 Location: La Crosse, WI Posts: 78 Thanks: 0 Thanked 3 Times in 3 Posts	My 50" Panasonic (1080p120hz) from a few years back uses around 75 to 80watts. My 24 inch computer monitor uses 19 watts.

01-29-17, 10:18 AM	#14
celblazer Helper EcoRenovator Join Date: Mar 2010 Location: South Jersey Posts: 57 Thanks: 42 Thanked 17 Times in 11 Posts	Sounds like you need to get into home automation. A Smartthings hub and an smart outlet and your set. It would work by both a timer and Alexa voice for override, I love saying "computer"(yup they added it as a wake word) turn on TV and having my screen come down, projector turn on and sound system fire up. You can also pause and change channels with Alexa and a Harmony remote. And the harmony remote will tie into ST and turn on/off the outlet automatically for you.

01-29-17, 04:16 PM	#18
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	It does look quick and easy.. But, I have a spare X10 AM466 for the STB, sitting here, ready to use.. Plus, I have three more AM466 modules connected to stuff I would like to control, maybe using a little logical home automation skills.. I think the $30 Broadlink thing might be fun to experiment with.. Broadlink RM Pro Smart Home Intelligent Wi-Fi IR+RF Universal Remote Control EU \| eBay __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

01-29-17, 04:23 PM	#19
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Yes it always better to use stuff you laying around than buying new stuff. Let us know how it works out. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

01-29-17, 07:20 PM	#20
celblazer Helper EcoRenovator Join Date: Mar 2010 Location: South Jersey Posts: 57 Thanks: 42 Thanked 17 Times in 11 Posts	I know on the Smartthings community someone integrated X10 into it. Not sure how deeply but might be an option to keep your old stuff and have it work with Alexa and ST.