09-15-08, 07:21 PM | #11 |
Administrator
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
|
Quite a bit when I have to hang the rice pot half off the flame for 20 minutes to get it at a low enough temperature. Besides, it cooks rice better. And the breadmaker will eliminate the need to heat an entire oven (and probably the whole kitchen as well).
|
09-16-08, 11:31 AM | #12 |
Need More Eco
|
Rice cookers are very efficient; ran one on the 1000 watt honda during Gustav no problem (estimated load from cooker 150 watts, 30 keep warm).
Bread is very cheap to make if you buy flour + other ingredients in bulk. |
09-16-08, 12:34 PM | #13 |
Lurking Renovator
Join Date: Aug 2008
Location: Maricopa, AZ
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Our $15 rice cooker broke after about a month. It cooked rice well though and never burned or overflowed. Now we just use the stove.
|
09-16-08, 05:02 PM | #14 | |
Apprentice EcoRenovator
Join Date: Sep 2008
Posts: 116
Thanks: 29
Thanked 12 Times in 11 Posts
|
Quote:
I've found something that puts open burner efficiency at 13%, so if someone wants to see how an electric appliance compares all they need to do is measure the power draw compared to the temperature of the rice/water and do a bit of physniks w/ the specific heat of rice/water. |
|
10-16-08, 02:40 PM | #15 |
Lurking Renovator
Join Date: Oct 2008
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
|
For making bread, look into getting a good stand mixer with a dough hook, it does the kneading for you(the only hard, time consuming part of making bread). Then you can make all sorts of good stuff, not just recipes that sort of work in a bread machine. Also then you can get a pasta maker attachment, even grain grinders, etc.
The wife recommends the non tilting kitchen aid ones, with some wattage. She is fairly serious about baking and doesn't really like bread makers at all. Ian Last edited by IndyIan; 10-16-08 at 02:45 PM.. |
02-28-09, 01:32 AM | #16 |
Lurking Renovator
Join Date: Feb 2009
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Breadmaker
I picked up my breadmaker for $3.84 at goodwill (they always have at least one). It came with instructions and a recipe book too. It is awesome. I made my money back on like the second loaf.
The reason it doesn't seem to last as long is because it is not filled with chemical preservatives. I tend to think this is a good thing. It freezes well and is super worth the money if you just decide you are going to use it and stop buying bread (an added bonus is fewer plastic bags). Also, comparing homemade bread to store bought bread is really apples to oranges because the stuff you make is much more nutritious (especially when compared to the cheap $.99 loaves in the store). Last edited by mav0077; 02-28-09 at 01:36 AM.. |
03-02-09, 04:57 PM | #17 |
Apprentice EcoRenovator
Join Date: Dec 2008
Location: Santa Fe, NM
Posts: 184
Thanks: 9
Thanked 12 Times in 11 Posts
|
A few thoughts and questions:
- Is your stove gas or electric and can you do a direct comparison of the energy used to cook rice in a machine vs. stove top (or breadmaker vs. oven)? - What quality of rice pot do you have? Cheaply made pots and pans make cooking anything a pain. Quality cookware (see: Consumer Reports or America's Test Kitchen - Equipment Center) is invaluable. - How often do you make bread? Home made bread is much better than store bought, unless you have a local, artisanal bakery. Do you need another appliance if you only make bread a couple of times a year? - No-knead breads (google for recipes) can be a great way to take the hassle out of baking. - Bread machines make funky shaped loaves, that may be less appealing than bread from a standard loaf pan. - Check your local Goodwill and thrift stores for inexpensive rice cookers, bread machines, cookware, etc. - Unplug any kitchen appliance not currently in use to eliminate phantom loads. FWIW, Tim
__________________
- DIY Adventures in Applied Sustainability - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
03-02-09, 10:44 PM | #18 | |
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Quote:
I'm actually thinking about making a programmable temperature controller to better control the temperature of simple heating devices. It will read the temperature using a k-type probe (stainless steel for direct contact with food) and use a triac to control the power. How I'll implement it is something I'm still thinking about. It should work with any heating device (not just kitchen appliances) that does not have electronics or motors. I think I'll base it around a microcontroller of some sort with a simple user interface based on a small LCD and some buttons. And of course, I'll install a switch that actually turns it off.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
|
03-03-09, 05:29 PM | #19 | |
Apprentice EcoRenovator
Join Date: Dec 2008
Location: Santa Fe, NM
Posts: 184
Thanks: 9
Thanked 12 Times in 11 Posts
|
Quote:
Show Me, Tim
__________________
- DIY Adventures in Applied Sustainability - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
03-04-09, 09:29 AM | #20 | |
Supreme EcoRenovator
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
|
Quote:
I might actually be able to give you numbers if I had a good clamp ammeter.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her... |
|
|
|