EcoRenovator  

Go Back   EcoRenovator > Improvements > Solar Power
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Reply
 
Thread Tools Display Modes
Old 08-04-21, 02:45 PM   #11
Piwoslaw
Super Moderator
 
Piwoslaw's Avatar
 
Join Date: May 2009
Location: Warsaw, Poland
Posts: 964
Thanks: 189
Thanked 111 Times in 87 Posts
Default

What about mounting the mirrors above the solar panels, facing down?
In such a way/angle that:
- when the sun is low in the winter, it hits the underside and reflects to the panels,
- when the sun is higher in the summer, the mirror partially shades the panels, helping reduce the risk of overheating.

They could also be mounted vertically on the sides, focusing the sun from due south in the winter, but shading due east and due west on summer mornings/evenings.

__________________
Ecorenovation - the bottomless piggy bank that tries to tame the energy hog.
Piwoslaw is offline   Reply With Quote
Old 08-05-21, 10:09 AM   #12
SDMCF
Apprentice EcoRenovator
 
Join Date: Jul 2014
Location: Finland
Posts: 125
Thanks: 5
Thanked 35 Times in 34 Posts
Default

That sounds a good approach, if the mirrors could be mounted safely and firmly so they were not converted into a kite in the first high wind. Not impossible by any means, it would just need a bit of care.
SDMCF is offline   Reply With Quote
Old 08-09-21, 05:28 PM   #13
oil pan 4
Land owner
 
Join Date: Nov 2012
Location: NM
Posts: 1,026
Thanks: 12
Thanked 127 Times in 107 Posts
Default

For 1 reflecting more light on solar panels voids their warranty. 2 unless you can reflect the light over every single cell you won't see any increase in output on traditional panels.
oil pan 4 is offline   Reply With Quote
Old 04-04-22, 11:32 PM   #14
ecomodded
Supreme EcoRenovator
 
Join Date: Sep 2012
Location: Vancouver Island,Canada.
Posts: 1,037
Thanks: 116
Thanked 100 Times in 87 Posts
Default

After looking into it my idea is to enclose my pv array in a fenced in area with it’s inside walls painted white to “brighten” up the area.

A Mirrors reflection will cause a hotspot on the panel that over time could likely damage it.
Using a softer reflective material like the white Tyvek ( very reflective ) or say flat white painted plywood would be safer (cooler) and likely still boost the lumens.

I’ll test this theory using a diy Tyvek reflector this summer then test again in winter to compare in different temperatures. A 20% gain in the winter would be a big win

__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
ecomodded is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design