I picked up a 40 ton press today

pinballlooking · 08-19-20, 08:46 PM

I picked up a 40 ton press today off market place for $230.
It is funny it is pneumatic but they never connected up air to it.
I also got victor torch, hose and gauges for $50
We make a lot of dimples on our 20 ton press but ¼" Max's it out this one should be much better.
We will use the other one just as a metal brake now.

This is not my shop.

Daox · 08-20-20, 06:29 PM

You're going to have a full metal shop pretty soon! Nice pickup.

pinballlooking · 08-20-20, 06:42 PM

Thanks, it has been a wild ride this summer. We are at gross sales over 27K so far. Not real big for a full-time business but a lot for a side business.

I have all my equipment paid off now so I need to find equipment deals so I can make profit.

When I say paid off the metal business borrowed money from my primary business.
The metal business has paid my other business back. The money was not borrowed in the traditional sense.

pinballlooking · 06-16-21, 01:47 PM

I did not keep this more than a year. It really worked great.

I bought those two new presses I sure do not need 4 presses.
I sold this one on marketplace today for $675. Not a bad profit plus this money can go towards the two 55 ton presses. They drove from outside Birmingham Alabama 5 1/2 hours one way to get it.

Crazy but they brought cash so it works for me.

Daox · 06-16-21, 02:48 PM

Sounds like a great deal for you. Nicely done!

pinballlooking · 06-16-21, 03:33 PM

Thanks, it takes my other presses $1500 - 675 down to $825.

The other thing they sent him in dually truck that got 10.5 miles to the gallon.
The press was only 525 pounds.

The press I sold is 1300 plus tax new. If you needed one it was not a bad deal.

08-19-20, 08:46 PM	#1
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I picked up a 40 ton press today I picked up a 40 ton press today off market place for $230. It is funny it is pneumatic but they never connected up air to it. I also got victor torch, hose and gauges for $50 We make a lot of dimples on our 20 ton press but ¼" Max's it out this one should be much better. We will use the other one just as a metal brake now. This is not my shop. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-20-20, 06:29 PM	#2
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	You're going to have a full metal shop pretty soon! Nice pickup. __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-20-20, 06:42 PM	#3
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Thanks, it has been a wild ride this summer. We are at gross sales over 27K so far. Not real big for a full-time business but a lot for a side business. I have all my equipment paid off now so I need to find equipment deals so I can make profit. When I say paid off the metal business borrowed money from my primary business. The metal business has paid my other business back. The money was not borrowed in the traditional sense. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

06-16-21, 01:47 PM	#4
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I did not keep this more than a year. It really worked great. I bought those two new presses I sure do not need 4 presses. I sold this one on marketplace today for $675. Not a bad profit plus this money can go towards the two 55 ton presses. They drove from outside Birmingham Alabama 5 1/2 hours one way to get it. Crazy but they brought cash so it works for me. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

06-16-21, 02:48 PM	#5
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Sounds like a great deal for you. Nicely done! __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

06-16-21, 03:33 PM	#6
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Thanks, it takes my other presses $1500 - 675 down to $825. The other thing they sent him in dually truck that got 10.5 miles to the gallon. The press was only 525 pounds. The press I sold is 1300 plus tax new. If you needed one it was not a bad deal. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 06-24-21 at 04:32 PM..