I bought a commercial -20 freezer to make into a powder coat oven. - Page 2

pinballlooking · 04-02-20, 10:17 PM

School me on this I am new to powder coating.
I just have a very cheap dual voltage Eastwood gun. I would like it to have a adjustable power supply. It only goes to 15K or 25K no adjustment.

I did a search and a analog like this on looks like it went from 0-100K.
That is right where you want to be.
could this be added to my gun in place of its cheep power supply.
If so are you selling it?

dguzzi · 04-03-20, 01:57 PM

Definitely want to sell, I'm not sure if your gun would plug and play. Here is a pic of the connections (3 pins for the gun) This is Model EPS-542A

Click image for larger version

Name: IMG_20200403_135214269.jpg
Views: 979
Size: 490.2 KB
ID: 8922

pinballlooking · 04-03-20, 02:32 PM

I could not find much info on it. Do you have a manual? Or any to good info on it?
Can’t really see in the HV plug how may contact pins are in there?

dguzzi · 04-03-20, 02:36 PM

No pins in the High tension plug, I'd guess its a single well insulated wire (like a spark plug) I don't have a manual for it. I'll try searching as well.

dguzzi · 04-05-20, 11:27 AM

Not finding much either. I did find this one https://www.ebay.com/itm/312640429375

Crazy price! If you want to try it I'll take 50$ and shipping.

Its to bad we aren't closer, I would give you some free rock wool!

pinballlooking · 04-10-20, 12:27 PM

Thanks for the offer but I do not know enough about it to even try to use it.
Rock wool would have worked better.

I got some step orders I had to get shipped.
Those are done and I hope to spend some time on my oven this weekend.
I am proto typing a new item to sell.

My shop is such a mess I need to rearrange things add some wiring.
Always something to do I am sure you all can relate to that.

It looked like my primary work was drying up but they decided to use me for more work.
Getting paid has really slowed down...
I am happy to be working for now.

dguzzi · 04-10-20, 12:36 PM

Ok, no problem...if you find you might be able to use it I have it here. Good luck with your projects, stay safe!!

04-02-20, 10:17 PM	#11
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	School me on this I am new to powder coating. I just have a very cheap dual voltage Eastwood gun. I would like it to have a adjustable power supply. It only goes to 15K or 25K no adjustment. I did a search and a analog like this on looks like it went from 0-100K. That is right where you want to be. could this be added to my gun in place of its cheep power supply. If so are you selling it? __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

04-03-20, 02:32 PM	#13
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I could not find much info on it. Do you have a manual? Or any to good info on it? Can’t really see in the HV plug how may contact pins are in there? __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 04-03-20 at 03:20 PM..

04-05-20, 11:27 AM	#15
dguzzi Helper EcoRenovator Join Date: Nov 2014 Location: Michigan Posts: 68 Thanks: 3 Thanked 2 Times in 2 Posts	Not finding much either. I did find this one https://www.ebay.com/itm/312640429375 Crazy price! If you want to try it I'll take 50$ and shipping. Its to bad we aren't closer, I would give you some free rock wool! Last edited by dguzzi; 04-05-20 at 02:29 PM..

04-10-20, 12:27 PM	#16
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Thanks for the offer but I do not know enough about it to even try to use it. Rock wool would have worked better. I got some step orders I had to get shipped. Those are done and I hope to spend some time on my oven this weekend. I am proto typing a new item to sell. My shop is such a mess I need to rearrange things add some wiring. Always something to do I am sure you all can relate to that. It looked like my primary work was drying up but they decided to use me for more work. Getting paid has really slowed down... I am happy to be working for now. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

04-03-20, 01:57 PM	#12
dguzzi Helper EcoRenovator Join Date: Nov 2014 Location: Michigan Posts: 68 Thanks: 3 Thanked 2 Times in 2 Posts	Definitely want to sell, I'm not sure if your gun would plug and play. Here is a pic of the connections (3 pins for the gun) This is Model EPS-542A

04-03-20, 02:36 PM	#14
dguzzi Helper EcoRenovator Join Date: Nov 2014 Location: Michigan Posts: 68 Thanks: 3 Thanked 2 Times in 2 Posts	No pins in the High tension plug, I'd guess its a single well insulated wire (like a spark plug) I don't have a manual for it. I'll try searching as well.

04-10-20, 12:36 PM	#17
dguzzi Helper EcoRenovator Join Date: Nov 2014 Location: Michigan Posts: 68 Thanks: 3 Thanked 2 Times in 2 Posts	Ok, no problem...if you find you might be able to use it I have it here. Good luck with your projects, stay safe!!