EcoRenovator  

Go Back   EcoRenovator > Improvements > Lighting
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Reply
 
Thread Tools Display Modes
Old 06-30-17, 10:22 PM   #21
natethebrown
Apprentice EcoRenovator
 
Join Date: Aug 2012
Location: North Alabama
Posts: 167
Thanks: 0
Thanked 40 Times in 20 Posts
Default

I started my grow lamp experiment on June 20th. This time I used Roma, Rio Grande, Brandywine, and Kale seeds (all I had left).

So, I go out of town Tuesday morning, leaving the wife back to take care of everything and come home, Friday night (June 30), to this:



I believe this is pretty conclusive that the grow light does in fact work, but my seed starting soil I used this past winter is total and utter garbage (column 2 in the picture). One thing I will say is my grow light does seem under powered. I believe I should be able to mount 4 more 10W (9W actual) LED COBs on it to bring up the total output to around 100W (90W actual).

Also, this picture also shows that the Jiffy All Natural Seed Starting Mix (rows 1 and 3) is the best seed starting mix out of all of them. I forgot to get a picture of the plants outside in the sun, which indicates the same thing, but I will do that tomorrow morning.

I can't wait to get these plants in the garden as soon as they grow a little bit more and harden off!


Last edited by natethebrown; 07-01-17 at 09:53 AM..
natethebrown is offline   Reply With Quote
Old 07-01-17, 09:58 AM   #22
natethebrown
Apprentice EcoRenovator
 
Join Date: Aug 2012
Location: North Alabama
Posts: 167
Thanks: 0
Thanked 40 Times in 20 Posts
Default

Here are a couple of top down views. The first one is plants from under the growlight. The second are sun grown plants. Note, they were started at different times, so a comparison between growlight vs. sun light is not a good one.

For the soils, from left to right:
#1 - Jiffy All Natural w/ seeds soaked for 1 hour
#2 - American Country Top Soil (original)
#3 - Jiffy All Natural
#4 - MG Nature's Care
#5 - MG Seed Starting Mix

Growlight Plants:


Sun Grown:


Conclusions:
1) Jiffy All Natural is the best seed starting mix out of the 4 that I tried, followed by MG Seed Starting Mix.
2) In both experiments, I soaked one entire set of seeds(column #1 for both) for 1 hour and saw little to no difference in the final results. Longer seed soaking may be a future experiment.
3) A 50W (actual) LED COB grow light, running 19 hours a day, is just barely enough power to get a small set of seedlings started.
natethebrown is offline   Reply With Quote
The Following User Says Thank You to natethebrown For This Useful Post:
where2 (07-02-17)
Old 11-21-17, 11:30 AM   #23
asif22
Lurking Renovator
 
Join Date: Nov 2017
Location: punjab
Posts: 11
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Good idea about the color spectrum,it will really help us to control the brightness.
asif22 is offline   Reply With Quote
Old 12-11-17, 08:24 AM   #24
natethebrown
Apprentice EcoRenovator
 
Join Date: Aug 2012
Location: North Alabama
Posts: 167
Thanks: 0
Thanked 40 Times in 20 Posts
Default

Quote:
Originally Posted by Daniel888 View Post
First of all, thank you for sharing your experiment and such a brilliant review! I am currently in a search of a good led grow light, and I guess I want something lightweight, not pricey and easy to set-up. I tend to Apollo Horticulture which I found in this review https://smokeandbuzz.com/ ( very helpful btw ), all the characteristics suit me perfectly (I don't need very intense light and I don't want any heavy device). I couldn't do anything by myself like you did, I personally find it very difficult, I just decided to get a new led grow light with 2-3 years of official warranty in case something goes wrong. I also watched great deal of Youtube videos on this topic and most authors recommend new device, not used or handmade.
Yeah, those pot heads really know their technology and have really pushed the grow-light market technology development! I think it would depend on a few different circumstances if I was to agree with "not using homemade."
First, if the crops you are growing are for the upcoming garden season and you cannot weather a seed sprout failure, yes I would agree.
If you are just playing around and can handle failures, I would disagree.
If you want to learn something new or test your skills, I would disagree.

Anyways, LED COB technology has continued to develop even after my initial project. Any new LED grow light projects I will use these:
https://www.ebay.com/itm/Full-Spectr...ydC01Ze8_OTyjA
They hook directly up to 110v AC, so you can literally plug them strait into the wall (obviously after you mount them to a heatsink).
natethebrown is offline   Reply With Quote
Old 02-05-19, 07:35 AM   #25
natethebrown
Apprentice EcoRenovator
 
Join Date: Aug 2012
Location: North Alabama
Posts: 167
Thanks: 0
Thanked 40 Times in 20 Posts
Default LED Grow Light Version 1.1

Well I was one of those "lucky" feds who got a 35 day paid vacation and had plenty of free time to get around to upgrading my LED grow light. I added the 4 additional COBs and drivers then tidied everything up. I got the wires covered in heat shrink and the fan permanently mounted on a shroud. Also, I want to somehow cool the drivers with a little forced air because they got quite hot last year and I had a failed driver. I will probably get some cheap plastic tube from the hardware store and mount it directly above the fan and duct the airflow around the drivers.

Now the total output is approx 100W. While this might seem high I believe it will give me some flexibility on positioning the grow light that I previously didn't have.






LED Grow Light Version 2.0 coming soon!
natethebrown is offline   Reply With Quote
Old 10-25-19, 05:24 AM   #26
morandsa
Lurking Renovator
 
Join Date: Oct 2019
Location: HONG KONG
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

You can come here to find LED plant lights
morandsa is offline   Reply With Quote
Old 01-02-20, 10:26 PM   #27
gadget
Helper EcoRenovator
 
Join Date: Dec 2019
Location: Northern Utah
Posts: 49
Thanks: 1
Thanked 2 Times in 2 Posts
Default

Any updates Nate? I'm going to use some of these cheap COB Led for a diversion load from my solar. Since they are current driven devices, they should work fine for extra solar power.

Don't use photo bucket anymore. The blurry / watermark pics kill this great thread.

I have good luck with imgur for hosting. They seem to be the most reliable over time.

gadget is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design