09-25-19, 12:59 PM | #1 |
Lurking Renovator
Join Date: Sep 2019
Location: SC
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hanwha array output variation question
Hello,
Just found this forum and thought I'd ask a question. We recently activated our 2 arrays made up of (28) Hanwha Q CELLS Q.PEAK DUO Q.PEAK DUO-G5 315 modules. I've attached a screen shot showing the output so far today, for example. For the most part, they're all performing consistently. Except for one guy shown as 923 in the West array as shown in the attachment. My question is, is this a normal variation or is this a bad panel? I'm not totally sure what variation to expect, so before I hassled our installer, I thought perhaps someone here may lend some insights. Thanks for any thoughts. |
09-25-19, 03:42 PM | #2 |
Super Moderator
Join Date: Jun 2013
Location: SC
Posts: 2,923
Thanks: 172
Thanked 564 Times in 463 Posts
|
Where in SC are you?
I would not be worried about that. Does than on get any shade? I had one performing not as well and it have a big bird feather on it. Dirt can make a difference or bird doo. Here is mine you can easily see the three micro inverters that were replaced under warranty. The bottom array was put in a few months later.
__________________
Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 09-25-19 at 04:35 PM.. |
|
|