04-19-18, 03:20 PM | #11 |
Lurking Renovator
Join Date: Jun 2017
Location: Utah
Posts: 25
Thanks: 5
Thanked 15 Times in 10 Posts
|
Judging from the pictures it looks like you're using a Sunpower inverter. Is that the case and is it paired with power optimizers, or do you have a micro inverter setup? Does it give you an online dashboard you can look at your power production like the SolarEdge inverters do?
__________________
DIY installed a 9.98 kW rooftop solar system with REC TP2 panels, SolarEdge SE7600a-us grid tie inverter, power optimizers, & Snap 'N Rack mounting system. |
06-06-18, 08:43 AM | #12 |
Journeyman EcoRenovator
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
|
We have Sunpower micro inverters, and that Sunpower unit is the connection to the network. We have two online dashboards, actually - Sunpower and BlueSel, who were the installers.
At 60 days of production from our 10.1kW solar array, we have a total of 2.386.1kWh, which was 70.7% of what we used. That's 39.77kWh / day average. (We had several cloudy days recently.) We have also switched our grid supplier, and gone from about 61% renewable energy, to 100% wind renewable - and better yet - we are saving 3.19¢ / kWh! We have two electric cars, and one gasoline one. The Scion xD sits in the driveway 6 days a week, usually. And our natural gas bill is tiny, as well - we cook and dry our clothes with natural gas. Next stove will be an induction unit, and hopefully the next clothes dryer is either a heat pump, or ultrasonic (if they produce them). |
|
|