Refrigeration tools/kit

KazBach · 07-31-16, 04:07 PM

I am considering a career in HVAC, I'm going to need some tools and want a 'refrigeration kit' to tinker/learn with.

Here is my list so far, if anyone has anything to add/remove or knows a good place to purchase these items please holler.

Tools:

Manifold / Pump
Copper Piping / brazing equip | Solder | Coils | Cutter | Cap tube
Volt / amp-meter clamp
Various hand tools
Fin straightener

Project: Simplest refrigeration system possible

I'm going to follow along with MC Pletcher's videos and use a DC compressor

Compressor | Electronic Unit
Condenser
Evaporator / Fan
Filter/dryer
DC Power | Plug
Oil, Freon, Copper fittings

CrankyDoug · 08-15-16, 01:59 PM

Since nobody has responded to this I will take a stab at it.

First, buy a used copy of Fundamentals of HVAC/R by Carter Stanfield and David Skaves. This is the standard text for anyone entering the trade in the US. It is well written and thoroughly vetted.

Second, read the above text from cover to cover, repeatedly, until you understand it.

Third, look into the HVAC program offered at your local technical school. Some are great (Carter Stanfield runs one somewhere here in GA). Some of them will simply take your money and waste your time. The program at our local tech school doesn't even prepare you for certification.

Fourth, find a reputable HVAC/R service company that will take you on as an apprentice.

Fifth, do not even think of doing this for money until you have your certifications and meet state requirements for a contractors license. You will be ratted out immediately by professionals who are doing more than just protecting their territory. They are protecting the reputation of an industry that already has a tarnished image.

Summary: None of the above may have been what you were looking for but they are they necessary steps to entering the field. If you are just looking to learn enough to work on your own AC then buy the book, read it, and peruse the threads here and on some of the professional forums.

KazBach · 08-15-16, 03:08 PM

I signed up at an HVAC forum and your advice squares nicely with theirs. Thank you very much CrankyDoug for taking the time.

07-31-16, 04:07 PM	#1
KazBach Lurking Renovator Join Date: Jul 2016 Location: San antonio, Texas Posts: 7 Thanks: 5 Thanked 0 Times in 0 Posts	Refrigeration tools/kit I am considering a career in HVAC, I'm going to need some tools and want a 'refrigeration kit' to tinker/learn with. Here is my list so far, if anyone has anything to add/remove or knows a good place to purchase these items please holler. Tools: Manifold / Pump Copper Piping / brazing equip \| Solder \| Coils \| Cutter \| Cap tube Volt / amp-meter clamp Various hand tools Fin straightener Project: Simplest refrigeration system possible I'm going to follow along with MC Pletcher's videos and use a DC compressor Compressor \| Electronic Unit Condenser Evaporator / Fan Filter/dryer DC Power \| Plug Oil, Freon, Copper fittings

08-15-16, 01:59 PM	#2
CrankyDoug Apprentice EcoRenovator Join Date: Jul 2016 Location: Georgia Posts: 100 Thanks: 6 Thanked 14 Times in 11 Posts	Since nobody has responded to this I will take a stab at it. First, buy a used copy of Fundamentals of HVAC/R by Carter Stanfield and David Skaves. This is the standard text for anyone entering the trade in the US. It is well written and thoroughly vetted. Second, read the above text from cover to cover, repeatedly, until you understand it. Third, look into the HVAC program offered at your local technical school. Some are great (Carter Stanfield runs one somewhere here in GA). Some of them will simply take your money and waste your time. The program at our local tech school doesn't even prepare you for certification. Fourth, find a reputable HVAC/R service company that will take you on as an apprentice. Fifth, do not even think of doing this for money until you have your certifications and meet state requirements for a contractors license. You will be ratted out immediately by professionals who are doing more than just protecting their territory. They are protecting the reputation of an industry that already has a tarnished image. Summary: None of the above may have been what you were looking for but they are they necessary steps to entering the field. If you are just looking to learn enough to work on your own AC then buy the book, read it, and peruse the threads here and on some of the professional forums.

08-15-16, 03:08 PM	#3
KazBach Lurking Renovator Join Date: Jul 2016 Location: San antonio, Texas Posts: 7 Thanks: 5 Thanked 0 Times in 0 Posts	I signed up at an HVAC forum and your advice squares nicely with theirs. Thank you very much CrankyDoug for taking the time.