$50 rebate on TED 5000 whole house electric monitor - Page 2

NeilBlanchard · 06-01-14, 08:16 AM

Thanks for the feedback.

Xringer · 06-01-14, 10:02 AM

Quote:

Originally Posted by NeilBlanchard

Thanks for the feedback.

That Hub seems like a pretty good way to go.
You will have to run cat5 over to your clamp-on amp probe.

It's pretty easy to calibrate an Elite display unit, if you can measure/compare with another device that you trust is reading correctly.
I used my outdoor Nstar meter and later used a clamp-on amp meter.

The Elite LCD display unit has a wide voltage range adjustment, so you can just tweak it up and down and see the wattage display change.
When it matches your standard, it's in cal..

Pretty much..

So, I assume the software App has the same kind of line voltage 'set' parameter.
Or, maybe they have something called a 'Cal' button..

Just got our NStar bill for May!

NeilBlanchard · 06-01-14, 09:59 PM

Yes, the charge has gone up quite a bit lately. Last I looked is was 19.2¢/kWh.

06-01-14, 08:16 AM	#11
NeilBlanchard Journeyman EcoRenovator Join Date: Dec 2009 Location: Maynard, MA Eaarth Posts: 383 Thanks: 78 Thanked 39 Times in 32 Posts	Thanks for the feedback.

06-01-14, 09:59 PM	#13
NeilBlanchard Journeyman EcoRenovator Join Date: Dec 2009 Location: Maynard, MA Eaarth Posts: 383 Thanks: 78 Thanked 39 Times in 32 Posts	Yes, the charge has gone up quite a bit lately. Last I looked is was 19.2¢/kWh.