![]() |
![]() |
#11 |
Journeyman EcoRenovator
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
|
![]() Thanks for the feedback.
|
![]() |
![]() |
![]() |
#12 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
![]() That Hub seems like a pretty good way to go.
You will have to run cat5 over to your clamp-on amp probe. It's pretty easy to calibrate an Elite display unit, if you can measure/compare with another device that you trust is reading correctly. I used my outdoor Nstar meter and later used a clamp-on amp meter. The Elite LCD display unit has a wide voltage range adjustment, so you can just tweak it up and down and see the wattage display change. When it matches your standard, it's in cal.. ![]() So, I assume the software App has the same kind of line voltage 'set' parameter. Or, maybe they have something called a 'Cal' button.. ![]() Just got our NStar bill for May! ![]()
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
![]() |
![]() |
![]() |
#13 |
Journeyman EcoRenovator
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
|
![]() Yes, the charge has gone up quite a bit lately. Last I looked is was 19.2¢/kWh.
|
![]() |
![]() |
![]() |
|
|