EcoRenovator  

Go Back   EcoRenovator > Improvements > Tools
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Reply
 
Thread Tools Display Modes
Old 11-01-13, 01:03 AM   #1
SVOboy
Administrator
 
SVOboy's Avatar
 
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
Default Tools needed to turn wood bowls?

Hi all,

With my huge amount of free time I'm pondering lots of things to do. When I was younger I used to turn some things on the lathe at school and really enjoyed it, so I was thinking about picking up a mini-lathe and turning some small bowls, etc.

I take it I need:
lathe
chuck
tools
wood

What else am I missing? Lathes seem to be expensive in Japan so I'll probably end up ordering one from the US, so if you have any suggestions, please let me know.

SVOboy is offline   Reply With Quote
Old 11-01-13, 02:44 PM   #2
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Do you have any Harbor Freight stores in your area?

Search results for: 'wood lathe'
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 11-01-13, 07:39 PM   #3
hamsterpower
Apprentice EcoRenovator
 
Join Date: Oct 2009
Posts: 142
Thanks: 0
Thanked 11 Times in 11 Posts
Default

I have not turned any bowls yet. I understand you need a kiln to thoroughly dry the wood before turning a bowl. Otherwise it will warp and crack.

I saw a guy use an old fridge case with a warm light bulb and a small fan for his kiln.
hamsterpower is offline   Reply With Quote
Old 11-03-13, 04:44 PM   #4
SVOboy
Administrator
 
SVOboy's Avatar
 
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
Default

Quote:
Originally Posted by Xringer View Post
Do you have any Harbor Freight stores in your area?

Search results for: 'wood lathe'
No harbor freight in Japan, unfortunately
SVOboy is offline   Reply With Quote
Old 11-03-13, 06:06 PM   #5
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by SVOboy View Post
No harbor freight in Japan, unfortunately
Forgetful me..

Well, almost all the lathes that Harbor Freight sales here, come from China.
Might be less expensive, ordering from from there.



Ring Master Wood Bowl Lathe w Steady Rest Alpha Pioneer Orlando | eBay

I had never heard of a Bowl Lathe until now..

Wow, tons of videos on youtube!!
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 11-03-13, 07:29 PM   #6
SVOboy
Administrator
 
SVOboy's Avatar
 
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
Default

Yeah, Youtube has tons of information which is a big help.

Currently I am looking at this:

Excelsior 5-Speed Mini Lathe, MC-1018 - Rockler Woodworking Tools

I need to figure out whether or not I need a chuck, and if so what chuck to get. It would be nice if I could go to a shop and buy this stuff but oh well
SVOboy is offline   Reply With Quote
Old 11-03-13, 07:38 PM   #7
SVOboy
Administrator
 
SVOboy's Avatar
 
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
Default

Or this one: NOVA Comet II Midi Lathe
SVOboy is offline   Reply With Quote
Old 11-03-13, 07:58 PM   #8
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by SVOboy View Post
That is slick!! NOVA COMET II Midi Lathe Overview at IWFS 2012 - YouTube
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..
Xringer is offline   Reply With Quote
Old 11-03-13, 08:15 PM   #9
SVOboy
Administrator
 
SVOboy's Avatar
 
Join Date: Aug 2008
Posts: 291
Thanks: 3
Thanked 4 Times in 4 Posts
Default

Indeed. It's just a bit more expensive :/
SVOboy is offline   Reply With Quote
Old 11-07-13, 08:17 AM   #10
Ryland
Master EcoRenovator
 
Join Date: Mar 2009
Location: Western Wisconsin.
Posts: 913
Thanks: 127
Thanked 82 Times in 71 Posts
Default

I don't like to turn dry wood for bowls, but if you do want to dry wood, the best way is drop the chunk of wood in a paper bag filled with shavings or saw dust and wait a number of months, if you rush it it will crack, then when you put it on the lathe it will fly apart and hit you in the face!

Make sure you have a good chuck that has a good grip on the wood, often to do this you have to turn a ring on what will be the base of the bowl that the chuck will grab, or if you want to make a vary shallow bowl or plate you can take a disk of wood and using double sided tape, tape it on to a face plate, but doing that increases your chances of the whole thing flying off and for some reason when that happens it tends to aim for your face.

Ryland is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design