![]() |
![]() |
#1 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() During the energy audit of my house, I got to see a thermal imaging camera in action. It was amazing. With the flick of your wrist you can see exactly where cold is entering your house.
I have a normal IR thermometer as well as a somewhat more fancy black and decker IR thermometer & leak detector that has an LED that shines a light at whatever you're pointing at do. It turns blue when its colder and red where its hotter than your initial reference point. Its a neat device, but nowhere near as nice as a thermal imaging camera. Here is a quick review video on how it works: Looking up prices on thermal imaging cameras looks like they start around $1200 which is a bit out of my range. ![]() So, how can we make our own thermal imaging camera? I did some googling and here is what I found: DIY Heatmap "Infrared Thermal Image" using the Black and Decker TLD100 This is a somewhat manual way of making a 'thermal map' of an image. While it would work, it would be painfully slow and the resolution leaves a lot to be desired IMO. cheap-thermocam.tk This site seems to have the most complete set of instructions on how to make your own images from a normal IR thermometer. It uses a IR thermometer that automatically scans a portion of the room and then produces an image from that data. It still takes a while, but the resolution is much better. Has anyone seen any other options?
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by Daox; 03-26-11 at 09:36 AM.. |
![]() |
![]() |
The Following 2 Users Say Thank You to Daox For This Useful Post: |
![]() |
#2 |
Super Moderator
Join Date: May 2009
Location: Warsaw, Poland
Posts: 964
Thanks: 189
Thanked 110 Times in 86 Posts
|
![]() Wow! This idea crossed my mind once, but exited just as fast. It's good to see that someone has done it.
I'm surprised that there aren't cheaper thermovisioning options, even at the cost of lower resolution.
__________________
Ecorenovation - the bottomless piggy bank that tries to tame the energy hog. |
![]() |
![]() |
![]() |
#3 |
You Ain't Me
Join Date: Nov 2009
Location: Northampton MA
Posts: 662
Thanks: 6
Thanked 71 Times in 58 Posts
|
![]() These things aren't cheap and I don't know how you'd possibly DIY one. I know that the ones that just show temp are about $2,000 for a decent one and the ones that also will take a picture of light can be thousands more. I'd love to have one as it'd make me money but the initial investment is a killer.
|
![]() |
![]() |
![]() |
#4 |
Lurking Renovator
Join Date: May 2010
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Just a crazy idea. What about using the Black and Decker IR thermometer and Light Painting time laps technique?
Look up "Light Painting" in wikipedia(i would post a link but I can't yet) If you did it at the right speed you should be able to still see the parts of the wall and what was leaking. by doing a long exposer and moving the thermometer it should make the parts glow red, green or blue. Last edited by Piwoslaw; 03-27-11 at 02:26 AM.. Reason: Added link |
![]() |
![]() |
![]() |
#5 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
![]() When I was surveying my attic insulation for leaks, there were a lot of areas that really
couldn't be seen from a central location in the attic. Just the stuff stored in the attic obscures a great deal of the 'floor' area. With the heat turned up high down stairs, I had to move down the center of the attic, while scanning down each side, towards the eaves. I had the openings (between the rafters) numbered and drawn on a floor plan/map. As I scanned each section (with my Laser assisted IR pistola) , I marked the hot spots on my map.. After I was done, I used a long-handled tool to re-arrange the and/or add insulation. Checking my work with the scanner as I went. My point? Taking a few minutes to make your own map of the leaks, is pretty accurate and easy to do. I can see where an IR camera would be better for taking pictures from the outdoors, But, I've found the IR pistola can locate air leaks and cold spots from inside the house with very good precision. It's great for quickly checking your insulation work as you go.. I highly recommend owning a scanner.. They work! ![]() Last edited by Xringer; 03-27-11 at 10:37 AM.. |
![]() |
![]() |
![]() |
#6 |
Lurking Renovator
Join Date: Oct 2008
Location: Mirabel, QC
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() I was at a friend's house a couple months ago and he had one he borrowed from work. It was so neat, you could even see where there had been water leaks from the roof and into the walls in the past.
It would be nice if you could rent those. It's not like you need them everyday. Just rent it on a very cold or very hot day, take pictures of every surface and you know where you need to work. |
![]() |
![]() |
![]() |
#7 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
![]() I wonder why it would show up past water leaks in the walls..?.
Unless, it was sheet-rock and some of the 'rock' got washed away (into the basement) and now it's just thin cardboard over the water tunnels?? Humm, if it's mostly little air tunnels, maybe they would have a higher R-factor than plain old solid sheet-rock?? Maybe those leaking areas were warmer than the undamaged walls? Or, maybe it was the insulation between the studs that got washed down to the bottom..?. |
![]() |
![]() |
![]() |
#8 |
Lurking Renovator
Join Date: Dec 2010
Location: Melbourne, Australia
Posts: 12
Thanks: 0
Thanked 2 Times in 2 Posts
|
![]() Reviving an old thread in a search for thermal imaging;
I found this in a web search on the off chance there was a usable app for smartphones (yeah a long shot but it was late at night when I had the idea) Smartphone Thermal Imaging Attachment Becomes a Reality According to their website they're not due until August; $160 for a kit & $195 for an assembled unit. IR-Blue Kit | RH Workshop LLC I would be interested to see if it was any good to find air leaks and thermal bridges in a house. |
![]() |
![]() |
![]() |
|
|