Got a TED 1001 w/foot prints - Page 2

Xringer · 10-29-12, 11:43 PM

During the last few weeks, I noticed the receive LED on the TED display was flashing less often.
Once very 2 to 10 seconds. But lately it was once every 20 or 30 sec..
Then, yesterday it stopped all together..

I checks downstairs and the clamps are still in place, the transmitter is still flashing once per sec..
My X-10 gear still works fine, so the AC line is petty clean right now..

Plugged the display in, down at the outlet box.. No signal.. Nothing at all.
Maybe my grid power is so erratic, it burned up something in the TED hardware.?.

10-29-12, 11:43 PM	#11
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	TED is Dead During the last few weeks, I noticed the receive LED on the TED display was flashing less often. Once very 2 to 10 seconds. But lately it was once every 20 or 30 sec.. Then, yesterday it stopped all together.. I checks downstairs and the clamps are still in place, the transmitter is still flashing once per sec.. My X-10 gear still works fine, so the AC line is petty clean right now.. Plugged the display in, down at the outlet box.. No signal.. Nothing at all. Maybe my grid power is so erratic, it burned up something in the TED hardware.?. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..