12-02-11, 06:28 AM | #191 |
Dan_LASER
|
????????????????????
|
12-02-11, 06:29 AM | #192 |
Dan_LASER
|
I apologize but I must have 15 posts so I can give you a message
|
12-02-11, 06:31 AM | #193 |
Dan_LASER
|
??????????????????
|
12-02-11, 06:32 AM | #194 |
Dan_LASER
|
expect a message from you
|
12-02-11, 06:58 AM | #195 |
Dan_LASER
|
sorry for my English
|
12-02-11, 07:10 AM | #196 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Hello Daniel
Good Morning!
Here is the tracker circuit that I'm using. It's made by Red Rock and works very well. LED3X Solar Tracker Assembly This tracker must be used with a motor that has Limit Switches. LED3X Solar Tracker Assembly
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
12-02-11, 07:26 AM | #197 |
Dan_LASER
|
Thanks a lot
solar tracking in the pictures is not good what happened? |
12-02-11, 07:33 AM | #198 |
Dan_LASER
|
What happened to your cycle of the pictures above?
Relay circuit axicom |
12-02-11, 07:42 AM | #199 |
Dan_LASER
|
What happened axicom Relay circuit?
not working |
12-02-11, 07:59 AM | #200 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
After many cycles, the relay contacts wear out. Operation become erratic.
I replaced bad relay, but gave up on board after second failure. If you decided to use relays in a tracker, make sure to install sockets, so they will be easy to replace. (Without using soldering iron).
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
Tags |
electric, solar, tracker |
Thread Tools | |
Display Modes | |
|
|