03-09-18, 03:10 PM | #1 |
Lurking Renovator
Join Date: Mar 2018
Location: the Netherlands
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
Propane expansion valve temperatures?
Hi,
as I am planning to make my own heat pump and I like to be in control of what I do, I am looking into the way the Expansion valve is controlled. I think I have figured out how to make an Arduino controlled valve, but I need to know values to test it. Looking at a convensional valve and the placement in the system: I can see the capillary bulb or sensor 'steers' the throughput of the valve, based on the temperature between the outlet of the evaporator and the inlet of the pump / compressor. Is there a standard value / value range for specific refrigerants, and if so, which is it for propane / R290? Thanks, Hugo |
|
|