10-26-13, 03:11 PM | #11 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Hi Guys!
Thanks, I'm going to change the system off time to 10PM!!
And we shall see what happens.. ~~ I agree about pumping in some not-so-warm air. If it's warmer than my basement, it's welcome. I might just program the set-point for basement temp+5 deg F. My wife and I have already noticed it's nicer in the basement today. We can feel the difference. The log shows a 4 deg F gain, but a lot of that is due to heat leakage from the hotwater tank(PV gain) and my wife ran the dryer.. Bad data day again! One of these days, we'll get a solid solar day! The air the I'm pumping outdoors, is coming right off the floor (cold concrete slab) and is slightly contaminated with a heavy gas called Radon.. So, recycling it isn't the cards.. I'm pretty sure that a really good filter would be needed to clean it up. Got a little bug in my logging for some reason.. Here's the plot for the day.. Got some hot water in the tank and a little hot air in the basement..
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. Last edited by Xringer; 10-26-13 at 05:59 PM.. |
|
|