07-22-12, 02:27 PM | #1 |
Lex Parsimoniae
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
|
Bad workmanship in 1956
About 15 years ago when the large copper water line from the street connection (city water)
started leaking and had to be repaired ($1,400), I saved the old parts. The repair guy told me, the flare nut had been over-tightened, thinning the flare. Said it was a common mistake.. Today, I washed it off and saw what really happened back in 1956.. Crash pictures by Xringer - Photobucket It appears that some jerk played around with the pipe cutter, before cutting the pipe.. The deep slices around the pipe weakened it. After decades of water hammer and water-flow wear-down, it started leaking badly. It was about 12 feet down, under my front lawn. Luckily the Back-Hole was a larger model, because the rocks coming out of the hole got larger as he dug down. At around 8 feet down, he hit a big one. Roundish about 3x4 feet. A big smooth potato shaped granite rock that came down with the glacier ice.. Took them an hour to fish it out and haul it away.. Back in 1956, they dug around the big rocks, instead of running the line directly to the house. At least two other houses on this street have had the same repair done.. Anyways, when they made the repair, they cut off both flares (double male in center) and installed their repair kit.. I was really disappointed. It was a rubber hose with 3 SS hose clamps on each side.. They told me it was last at least 20 years.. Nothing to worry about.. Right!!
__________________
My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less.. |
|
|