![]() |
|
![]() |
#1 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() A couple of days ago, I stuck a thermometer up in my attic. Nothing fancy, just a wired unit that shows temperature. As its getting cooler, I'm finding the house cooling off slowly. I'd love to be able to get a bit more heat without having to turn on the furnace. So, last night I came home to find my attic at 92F (33C) at around 5pm and decided I was going to use some of that heat. I stuck a box fan into the attic access door and blew it down. Here is the very simple and quick setup.
Now, I'm not sure how much heat I really got out of it. The immediate area was definitely warm, but the room you see in the picture has a thermometer in the far corner and that didn't register any heat gain. However, when I went to sleep roughly 3.5 hours later the attic was still pretty warm as shown below. So, it looks like the heat definitely has to be better distributed. I need a way to get it down to the first floor first. My first idea is to use the cutoff chimney in the attic! Its currently uncapped and probably making me loose a fair amount of heat in winter. I just haven't gotten around to putting some insulation around it yet. ![]() To get it down to the first floor, I was thinking of using this vent hole that I had previously plugged up with foam. Its in my kitchen which is normally the coldest room in my house. Having some extra heat in there would be great. ![]() So, I'm just kind of throwing out the idea to see what people think and get some suggestions. To get much heat I'd probably need a fair size blower/fan I'd imagine. I'm also not sure how long this will be useful? Will it be completely useless in winter? I guess we'll just have to see. I also did a quick search on builditsolar and found this: Attic based solar heting attic temp logged data These show that its not an original idea by far, and the temperature log of the attic I guess suggests that winter use really doesn't seem very viable. However, different climates and different types of construction will alter temperatures. So, I guess I'll wait and see.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by Daox; 09-14-10 at 06:44 AM.. |
![]() |
![]() |
![]() |
#2 |
Journeyman EcoRenovator
Join Date: May 2009
Location: Buffalo, NY
Posts: 344
Thanks: 3
Thanked 17 Times in 15 Posts
|
![]() That second link is very informative. It looks like the attic stays hot roughly from noon to 4pm, but it doesn't look like usable heat when it's really cold out. If you're only getting 4hr a day, three months out of the year, it's probably not great.
The attic would be a good location for the clothes dryer, though, assuming you do laundry from noon to 4pm. |
![]() |
![]() |
![]() |
#3 |
Master EcoRenovator
Join Date: Mar 2009
Location: Western Wisconsin.
Posts: 913
Thanks: 127
Thanked 82 Times in 71 Posts
|
![]() what about installing a heat pump? the attic should always be warmer then the outside temp.
|
![]() |
![]() |
The Following User Says Thank You to Ryland For This Useful Post: |
![]() |
#4 |
Apprentice EcoRenovator
Join Date: Jul 2010
Location: East Coast of Florida, USA
Posts: 149
Thanks: 2
Thanked 5 Times in 5 Posts
|
![]() I would want some type of filtration on any attic air that I sent into the house. Too many bugs around here. And you don't want any insulation (especially if it's fiberglass) drawn into the house.
|
![]() |
![]() |
The Following User Says Thank You to Patrick For This Useful Post: |
![]() |
#5 |
Home Improvement Goon
Join Date: Oct 2008
Location: Moose Jaw, SK, CA
Posts: 96
Thanks: 0
Thanked 2 Times in 2 Posts
|
![]() Wow, that attic looks strikingly similar to my except I've brought the chimney down to just below the floor level of the attic. If your chimney is as full of creosote as my was, I highly recommend against blowing any air down it. And definite seal any openings if you decide to remove anymore of it - the creosote and cement dust will create an enormous mess.
|
![]() |
![]() |
The Following User Says Thank You to knowbodies For This Useful Post: |
![]() |
#6 |
Super Moderator
Join Date: May 2009
Location: Warsaw, Poland
Posts: 964
Thanks: 189
Thanked 110 Times in 86 Posts
|
![]() The first time I came across using attic heat was in John Seymour's book Blueprint for a Green Planet. Page 153 has a drawing of a solar house with a heat recycling pump, with the following description "This pumps the warm air that gathers in the upper parts of the house back to ground level where it is most useful".
If you have an unused chimney then go ahead and use it! It will save you the hassle and expense of running a duct between floors. Maybe make a circuit that checks temperatures and turns the fan on only when the attic is warmer than the kitchen? And Patrick is right about filtering. Any chance of getting some insulation on that attic door? |
![]() |
![]() |
The Following User Says Thank You to Piwoslaw For This Useful Post: |
![]() |
#7 | ||
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Sorry, I haven't responded to a bunch of posts here.
Quote:
Quote:
There is insulation above the door when its all closed up.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by Daox; 09-21-10 at 10:19 AM.. |
||
![]() |
![]() |
![]() |
#8 | |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Quote:
The attic got a good amount of cellulose blown in a while back, dust isn't too big and issue I don't think. If it is I'm sure I could filter it easily enough. Thanks for the link skyl4rk. I just wonder how much heat there will be up there in winter. Robertsmalls says 4hrs a day which IMO seems like a healthy amount of otherwise free heat. Its hard to tell by those graphs though. A heat pump wouldn't be a bad idea, but again I don't know how warm it'll be. All I have is the logged data from the first post. If the time window to pull heat is very small its probably not worth the work of trying to set one up. Anyone got any info on an inexpensive data logger? I could use an arduino to make my own, but I don't have time right now for another project unfortunately. Most of the ones I've seen are very expensive for more than one channel logging ($100+).
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
![]() |
![]() |
The Following User Says Thank You to Daox For This Useful Post: |
![]() |
#10 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
![]() Well, the house is still cooling off and I'm trying to hold back from turning the heat on. Tonight I came home from work to see the attic again at 90+ degrees F. So, I figured I'd give it another shot with an improvement. I found a piece of insulation to block the other part of the opening, so it should pull much more warm down. It does appear to be working quite a bit better now.
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
The Following User Says Thank You to Daox For This Useful Post: |
![]() |
Tags |
attic, heat, reclamation |
|
|