01-06-10, 04:16 PM | #1 |
Administrator
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
|
Eco-Friendly Glowing Wallpaper Could Replace Light Bulbs
How would you like glowing walls? Haha, sounds pretty funny to me, but I think it would be interesting!
Eco-Friendly Glowing Wallpaper Could Replace Light Bulbs | Gimundo | Good News... Served Daily
__________________
Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
01-07-10, 01:11 AM | #2 |
Super Moderator
Join Date: May 2009
Location: Warsaw, Poland
Posts: 961
Thanks: 188
Thanked 110 Times in 86 Posts
|
Eerie :shiver:
|
01-08-10, 08:51 AM | #3 |
Journeyman EcoRenovator
Join Date: Dec 2009
Location: Maynard, MA Eaarth
Posts: 383
Thanks: 78
Thanked 39 Times in 32 Posts
|
Well, the author of that article is not keeping up with energy efficient lighting: she says "constantly flickering florescent LED bulbs". Sheesh -- CFL's are the ones that "flicker" BUT you cannot see it (on the newer ones at least), and LED's are very definitely steady state. So in one phrase, she managed to conflate at least three things...
|
01-08-10, 10:00 AM | #4 |
Helper EcoRenovator
Join Date: Jan 2009
Posts: 75
Thanks: 3
Thanked 1 Time in 1 Post
|
Yes they are. However, (at least with the LED strands I got for lighting our tree) they flicker... at 60 Hz the same as the AC they are hooked up to. They can start and stop so quickly that you would never know, but slow motion video cameras and hands being waved in front of them don't lie. You may be able to smooth this out with some capacitors, but I am not that smart. The reason incandescent bulbs don't flicker is because the filament continues to glow between waves.
|
02-15-10, 11:44 PM | #5 |
Home-Wrecker
Join Date: Sep 2008
Location: SE Wisconsin
Posts: 546
Thanks: 3
Thanked 165 Times in 96 Posts
|
I saw at the store today that there was some glow in the dark paint available in a good-sized can.
That paint tends to be a bit off from white. Well, all the woodwork in my house is white. If a person painted a strip of trim on the wall near the floor with the glow-in-the-dark paint, it would allow a person to wander around at night without bumping into walls. It would be good for not waking up other people at night by turning the lights on. It would also be nice for when you have house guests visiting. It would also be good for stairwells. Those are never lit well enough, especially by your feet. I'm not saying that glow in the dark paint is going to light up the place - more to show you where things are.
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
|