EcoRenovator  

Go Back   EcoRenovator > Improvements > Appliances & Gadgets
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Reply
 
Thread Tools Display Modes
Old 05-22-22, 05:18 PM   #1
dguzzi
Helper EcoRenovator
 
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
Default using pressure to circulate water

I want to circulate water by using air pressure. Imagine a vessel with air in and water out, the water then returns to the same vessel.
I know it takes a check valve but it might need to be very sensitive?
I'll be trying this with a mock up (small jar and a loop) to test it out. Its for cooling on a small scale.
Any thoughts?

dguzzi is offline   Reply With Quote
Old 05-22-22, 09:17 PM   #2
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

You'll need to use the pressure to get the water to the highest point in the system, then vent the air. The water will then be free to drain back down via gravity. You'll probably need to turn off air for a bit to let the water back into the reservoire.

An air powered pump might be easier though.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 05-26-22, 05:56 PM   #3
dguzzi
Helper EcoRenovator
 
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
Default

Please think very small flow rate. The air pressure is from an aquarium pump. Pressurizing a small vessel with ice and water, then flowing to a loop and returning. The check is to prevent flow to the return, I think tiny head on that return so very sensitive check valve.
dguzzi is offline   Reply With Quote
Old 05-27-22, 12:35 AM   #4
Zwerius
Helper EcoRenovator
 
Zwerius's Avatar
 
Join Date: Aug 2014
Location: The Netherlands
Posts: 70
Thanks: 19
Thanked 26 Times in 14 Posts
Default

Quote:
Originally Posted by dguzzi View Post
Please think very small flow rate. The air pressure is from an aquarium pump. Pressurizing a small vessel with ice and water, then flowing to a loop and returning. The check is to prevent flow to the return, I think tiny head on that return so very sensitive check valve.
But how do you want to return the water to the vessel that's pressurized by the air? I don't understand how your system is supposed to be working.

Could you draw a small diagram?
Zwerius is offline   Reply With Quote
Old 05-27-22, 04:09 AM   #5
jeff5may
Supreme EcoRenovator
 
Join Date: Jan 2010
Location: elizabethtown, ky, USA
Posts: 2,431
Thanks: 431
Thanked 619 Times in 517 Posts
Send a message via Yahoo to jeff5may
Default

Sounds like a job for a water farm column to me. Works like magic.
jeff5may is offline   Reply With Quote
Old 05-27-22, 08:49 AM   #6
dguzzi
Helper EcoRenovator
 
Join Date: Nov 2014
Location: Michigan
Posts: 68
Thanks: 3
Thanked 2 Times in 2 Posts
Default

Zwerius; I was hoping the pressure combined with the slight head would return flow through a sensitive check valve to the vessel.
I may just use a second vessel for the return flow. I would use a pump but the flow rate is so very low I don't know where to source one.
dguzzi is offline   Reply With Quote
Old 12-06-23, 03:50 PM   #7
Barrowman
Lurking Renovator
 
Join Date: Oct 2020
Location: North Lincolnshire, England
Posts: 29
Thanks: 3
Thanked 1 Time in 1 Post
Default

A small peristaltic pump would work. You can get a 12 volt one which delivers about 70mls/min but you can run it at a lower voltage as long as you don't want to pump to a great height. It will then deliver a good bit lower flow.

Barrowman is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design