I bought a 74 year old compressor today on Market place. - Page 5

pinballlooking · 05-05-21, 12:20 PM

I did not use hardener in my paint. It does not require it, but it takes a while to cure if you do not use it.
I have left it sit outside in the sun to help get the paint to fully cure. I put it on kind of thick and I want it to last.

pinballlooking · 06-10-21, 11:43 PM

Compressor is not done yet but it is closer to where it will live right beside my other compressor.

pinballlooking · 08-10-23, 08:37 PM

Here it is in the new shop the Emax stayed in the old shop.
This old compressor is running my plasma table grinders...

https://youtube.com/shorts/WdCdSzbGjUg

pinballlooking · 11-13-23, 03:27 PM

The oil pressure was low and lower when hot.
I looked up the oil that Quincy recommended you use 30 weight. I bought some Quincy oil.
that is 30 weight compressor oil. Now it is very happy I had to lower the oil pressure.
Even when hot it has great oil pressure. I will switch to using this oil.
This compressor is doing a great job running the shop.

05-05-21, 12:20 PM	#41
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I did not use hardener in my paint. It does not require it, but it takes a while to cure if you do not use it. I have left it sit outside in the sun to help get the paint to fully cure. I put it on kind of thick and I want it to last. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

06-10-21, 11:43 PM	#42
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Compressor is not done yet but it is closer to where it will live right beside my other compressor. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

08-10-23, 08:37 PM	#43
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Here it is in the new shop the Emax stayed in the old shop. This old compressor is running my plasma table grinders... https://youtube.com/shorts/WdCdSzbGjUg Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 12-04-23 at 09:56 AM..

11-13-23, 03:27 PM	#44
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	The oil pressure was low and lower when hot. I looked up the oil that Quincy recommended you use 30 weight. I bought some Quincy oil. that is 30 weight compressor oil. Now it is very happy I had to lower the oil pressure. Even when hot it has great oil pressure. I will switch to using this oil. This compressor is doing a great job running the shop. Attached Thumbnails __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 12-04-23 at 09:55 AM..