View Single Post
Old 01-07-20, 02:09 PM   #32
pinballlooking
Super Moderator
 
pinballlooking's Avatar
 
Join Date: Jun 2013
Location: SC
Posts: 2,704
Thanks: 151
Thanked 510 Times in 418 Posts
Default

Here is the first part I cut out the 3/8 but I used a new cam software so I could start the cut from the center of the 30MM Circle (lead in).

But it made my 30mm holes cut 28mm the kerf width is not right. That is what the torch cuts out like a blade width. Once I have that adjusted, they will be back to 30mm.

Attached Images
 
__________________
Current project Aquaponics system , Passive Solar Greenhouse build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
pinballlooking is offline   Reply With Quote