I made a bin using two walls of cinder blocks (scavenged from a junk pile), one sheet of corrugated steel (leftover) and a pallet in the middle as a divider. I haven't put a front on it yet. Size is about 3ft tall by about 5 feet wide by whatever a pallet is deep (about 3 feet?). I stacked the cinder block so that they are staggered, which allows some air to get in. I should perforate the steel, but haven't yet.
As it gets full I'll find a solution for the front, but so far it isn't giving me much trouble and allows me to turn the pile more easily. I just leave a fork out there and when I add kitchen scraps every day or two, I turn the pile a little bit. It breaks things down FAST...
|