EcoRenovator - View Single Post - I think I just figured out a good DIY panel thats cheap

WillyP · 07-20-20, 07:36 PM

I made an air heater this way. I found if you drill the hole in the bottom off to one side, then stack them so hole is on the opposite side from the flip top hole, it gives better heat transfer. I'm not sure if that would matter with water. But I am really anxious to see if this works. Keep us posted.

07-20-20, 07:36 PM	#3
WillyP Helper EcoRenovator Join Date: Jul 2020 Location: Virginia Posts: 30 Thanks: 8 Thanked 3 Times in 3 Posts	I made an air heater this way. I found if you drill the hole in the bottom off to one side, then stack them so hole is on the opposite side from the flip top hole, it gives better heat transfer. I'm not sure if that would matter with water. But I am really anxious to see if this works. Keep us posted.