Quote:
Originally Posted by SimpleManLance
The picture that doesn't look like anything is of my GFI plug.
|
I resized your GFI image to the same size as the F7 image for comparison:
Above is the F7 GFI image in a 46F basement.
Above is your GFI image scaled to 320 high, not so bad considering your imager is 1/10 the cost of the F7.
The pic I took of a GFI was taken in an unheated basement, which was 46F at the time.
The Flir instruction sheet said 10 degree difference (minimum) for reasonable images.
Delta-T makes a big difference.
You have a lot of useful information there.
Keep going!
-AC